Acer logo appears 2 times then starts windows.

walking_dead
walking_dead Member Posts: 7 New User

Hi to all Acer community.
I have recently bought an Acer S670MG or M679G desktop computer with the following specs.
Intel core 2 due 3.1ghz. 6mb L2 cache.
6gb ddr3 ram at 1066mhz bus
Nvidia Geforce 9800GT 512mb/256bits external graphic card.
1tb SATA WD hdd.
and I have facing a problem that when I turned ON computer it sounds a beep and Acer Empowering People appears a couple of seconds then display is gone. then after coupe of seconds, again beeps sounds and again Acer logo appears and then starts the windows. can anybody help me why this happens. because of that booting time is much longer.
PSmiley Frustrated. in bios. I tried two hard drive modes. native ide and Raid. third is AHCI I think and this I did not try yet.
plz help.
bios. energy or American mega trend.
Windows 7 SP1 Ultimate 64bits.

Best Answer

Answers

  • Tommy-Acer
    Tommy-Acer VIP Posts: 6,317 Seasoned Specialist WiFi Icon
    Answer ✓

    A link to all of the troubleshooting that you've already done here:

    http://www.sevenforums.com/hardware-devices/293189-acer-logo-appears-2-times-then-starts-windows.html

     

    Issue appears to be solved from that thread.

  • walking_dead
    walking_dead Member Posts: 7 New User

    hahaha, that was also my thread..

    anyway, thanks, I solve my problem..

  • Tommy-Acer
    Tommy-Acer VIP Posts: 6,317 Seasoned Specialist WiFi Icon

    I'm aware, which is why it is linked here as the resolution for your issue.

    In future, anyone with a similar issue may be able to use that link to resolve their own issue.

  • walking_dead
    walking_dead Member Posts: 7 New User

    hmm, nice point of view..

  • Leho
    Leho Member Posts: 525 Mr. Fixit WiFi Icon

    Walk and Tommy

    So, I read the two pages of posts in the linked Windows 7 forum. The final solution (after a myriad of suggestions) was for a cousin to come over and reset BIOS to default values.

    Rather than the obtuse path wouldn't it have been simpler and more useful to give the solution here and reference the W7 forum link for further information?

    Leho

This discussion has been closed.