Ethernet Cable does not connect when plugged in Same cable setup worked with other pt5515-51-75bh.
Can anyone help me with an Ethernet connection problem. The problem is that I got a new network at my house and now my Ethernet doesn't connect when plugged in. It was working fine before the network switch. I troubleshooted it with another computer/cable/port so I don't think its the router. It was working with the old router. I have reinstalled the device + drivers and that didn't fix the issue. When I look at adapter settings it says that the cable is not plugged in and then switches to no signal however I tried to plug in the same cable/port to a different computer and it was fine. it could be a hardware issue but I'm not sure as it was working fine before the new network so I don't know. I have also tried to reset IP (TCP/IP reset with netsh winstock reset, netsh in ip reset and then ip config) and made sure that the computer isn't turning the controller off to save power. I used a random router I had that wasn't connected to internet and when I plugged in that router and ran a cable from that router to my computer, it registered that there was in fact, a cable plugged in but just no internet (because test router wasn't connected to internet). I am not sure where to go at this point. I was recommended to try to do a router reset to fix a possible duped IP issue but this didn't work. When I go to Ethernet settings on windows now, it briefly shows no internet and then switches to not connected. Any ideas are appreciated.
