No Bootable Device on Acer Spin 3, Model: SP314-53N-53SH, it is with HDD0: NVMe

Sambol
Sambol Member Posts: 6 New User
edited November 2023 in 2020 Archives
Can some one help me to resolve No Bootable Device on Acer Spin 3, Model: SP314-53N-53SH, it is with HDD0: NVMe.
I tried lot ways mentioned in site but still getting the same error. 

Best Answer

  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    Answer ✓
    How did you create the install flash drive? Did you use the Microsoft Media Creation Tool or Rufus? Either of those should give you a bootable flash drive. Just copying the ISO file over will not be bootable...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    Could you boot on a Windows install flash drive and use the Repair mode? Get into the command prompt and use diskpart to see what drives are attached, what volumes are active and what partitions are on the SSD? Let me know if you need instructions for those steps...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Sambol
    Sambol Member Posts: 6 New User
    I have flash drive formatted with NTFS and tried to F12 to boot it always open connect BIOS or NoBootable Device error message. 
    Can you please give me the step by step instructions how to read USB drive to get get Repair mode?
    and the boot order is empty and UEFI is grayed out 
    I tried to clean secure boot options and enabled F12 boot even it didn’t work.

    I really appreciate if some helpful information to resolve the issue.

    thanks,
    srini
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    Answer ✓
    How did you create the install flash drive? Did you use the Microsoft Media Creation Tool or Rufus? Either of those should give you a bootable flash drive. Just copying the ISO file over will not be bootable...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • aboka
    aboka Member Posts: 24 Networker
    i hv got a similar issue and the reason is the 1tb sata hdd died. and its link to OPTANE with RAID. and i cant find ways to make the hidden option show inside BIOS to show so i could disable the RAID. CTRL S seems not have any effect....
  • Sambol
    Sambol Member Posts: 6 New User
    Hi Billsey, Can you please share me BIOS settings to discover the boot flash drive? I tried with F12 boot enabled and clearing secure boot settings and UEFI boot mode disabled it was keep spins no booting, and tried F9 for default settings and tried then no bootable device found.
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    @Sambol I need you to answer the previous question, we could spend a lot of time trying to fix the laptop when the problem is the install flash drive is not bootable... :)
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Sambol
    Sambol Member Posts: 6 New User
    sorry, when i create USB flash thru windows media creation tool the laptop recognized the stick and got the window screen then acer logo, after it didn't move to next step I tried to remove USB when it get black screen. When I remove USB stick it says "No Bootable Device". 
  • billsey
    billsey ACE Posts: 34,645 Trailblazer
    edited December 2020
    OK, if you have used the Media Creation Tool then the USB drive is likely correct. When you press F12 at startup are you presented with a boot menu? You need to choose the USB drive there or else it will continue to try and boot from the bad drive. If F12 doesn't do anything you likely have to go into the BIOS and turn the F12 boot menu on. If the boot menu comes up and the boot is actually starting from the USB but it fails to complete likely the USB drive itself is bad.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.