No disk found when trying to install W10 on my new laptop, ACER Nitro 5 AN515-54, with complete info
System
Member Posts: 4,577 Seasoned Practitioner 
This discussion was created from comments split from: No disk found when trying to install W10 on my new laptop, ACER Nitro 5 AN515-54, with complete info.
0
Best Answer
-
I fixed the problem. As Axil wrote this is not an issue with the Windows keys but with the SSD drivers. To solve the problem, you need to:radko79 said:I have the same problem. Can anyone help with the issue? It is kind of annoying...
1. Download the following package: Intel Rapid Storage Technology driver.
2. Extract the ZIP file, and copy the extracted files on a USB drive. Connect this USB drive to the system where you are installing Windows 10
3. On the page where you select the drive to use, click Load Driver.
4. Click Browse, and navigate to the folder on the USB drive with the previously extracted files. When you selected this folder, click OK.
5. Select Intel RST VMD Controller 9A08 (TGL), and click Next.
6. The selected driver will be loaded, and the SATA drive will become available for selection on the screen.
source: https://us.answers.acer.com/app/answers/detail/a_id/67562/~/hard-disk-not-detected-during-windows-10-installation0
Answers
-
I have the same problem. Can anyone help with the issue? It is kind of annoying...0
-
I fixed the problem. As Axil wrote this is not an issue with the Windows keys but with the SSD drivers. To solve the problem, you need to:radko79 said:I have the same problem. Can anyone help with the issue? It is kind of annoying...
1. Download the following package: Intel Rapid Storage Technology driver.
2. Extract the ZIP file, and copy the extracted files on a USB drive. Connect this USB drive to the system where you are installing Windows 10
3. On the page where you select the drive to use, click Load Driver.
4. Click Browse, and navigate to the folder on the USB drive with the previously extracted files. When you selected this folder, click OK.
5. Select Intel RST VMD Controller 9A08 (TGL), and click Next.
6. The selected driver will be loaded, and the SATA drive will become available for selection on the screen.
source: https://us.answers.acer.com/app/answers/detail/a_id/67562/~/hard-disk-not-detected-during-windows-10-installation0 -
Hello,
This thread has been closed since there is an answer marked as the solution, if you still have problems with your computer, you can open a new question or create a new post so that other Acer community users can try to guide you to the best of their knowledge.
Thank you,
Acer-Manny
0
This discussion has been closed.
