Acer Aspire V3-574 nil response on power up

Root4me
Root4me Member Posts: 5 New User
edited October 2023 in 2020 Archives
Hi
Acer Aspire V3-574-73z1 laptop which has totally no response on pressing power up button.  It accidentally ran flat over weekend with no power cable, and has since died.
Assuming a drain of capacitors and NVRAM might clear the BIOS of incorrect setting, have done the following:

Removed battery, BIOS CR2032 battery, power adapter and held Power button down to clear capacitor.
Also tried the battery reset button for 10+. Seconds
Also removed SSD, RAM modules and repeated the above actions. 
Also tried booting with no battery but with power adapter plugged in. 
All the above make zero difference.  No response from motherboard.

 
When battery installed and power adapter plugged, the LEDs are amber, then turn blue indicating that the battery is 100% charged. 
Brand new CR2032 installed should the BIOS battery have been drained.

Can hear a faint clicking relay sound in front left corner, where LEDs and USB ports are located when Power button is pressed (only with power adapter and battery installed).

This has been a valued workhorse with almost zero problems over the years and still very performant spec, so would like to recover it if possible.  Has the motherboard had a component failure?  Are there any additional actions I could take here?

Thank you in advance for any contributions.

Cheers R4M 

Answers

  • billsey
    billsey ACE Posts: 34,222 Trailblazer
    It sounds like the battery has fallen below the threshold voltage, which disables charging in order to stay away from overheating/fire issues.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Root4me
    Root4me Member Posts: 5 New User
    Hi, many thanks for the suggestion. 

    Would it then not boot successfully if the  battery is removed, but with power adapter plugged in?  I have assumed that that power combination would / should work, but it doesn't.  All that happens is clicking from the motherboard relay (actually in the middle of the board and not the corner as I described above). 

    Appreciate your time and comments.  :-)
    R4M
  • Commodore_1995#
    Commodore_1995# ACE Posts: 98,322 Trailblazer
    Even with the battery disconnected, the laptop must turn on. However, it is necessary for the interlock button to be pressed down:

    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • Root4me
    Root4me Member Posts: 5 New User
    Thanks.  I have been replacing the casing, during the sequence of testing various scenarios, but not screwing it on fully.  It has been fully clicked around the edge clips on the keyboard/rest plate.  
    Will try a full screwing in, but any interlock would be being depressed by the case being reattached. 

    I still wonder if the BIOS has got its underwear twisted, but the NVRAM drain should have fixed that.  

    Thank you all.  :-)
  • billsey
    billsey ACE Posts: 34,222 Trailblazer
    Sometimes the difference between that button getting pressed or ot is a very small increment. Try putting some electrical tape to force the button closed for testing...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Root4me
    Root4me Member Posts: 5 New User
    Evening. 
    Well the motherboard doesn't have the interlocks presented on the image above sadly.  There are holes through which the base plate's projections penetrate and one does click so that must be the interlock.  

    Baseplate fully screwed down, clicked in and secured.  No boot possible. Centre of the motherboard still clicks steadily when the power-on button is depressed.  (Car starter motor analogy is accurate here).

    However, previously the battery led was amber for 10 seconds before turning blue.  Now the led is just amber suggesting a full, more comprehensive charge is taking place.  That is the only behaviour difference detected.

    Will dismantle, remove battery, reassemble, then try again to boot from power adapter only.  Or just wait until the amber goes blue again!   The interlock is the one variable I had not fully resolved before, so worth a bit more effort I reckon.  

    Appreciate the support.  Hope to be able to reciprocate one day.   Will update ltr . R4M.
  • Root4me
    Root4me Member Posts: 5 New User
    Hi,
    Have exhausted all combinations of battery in/out, power bank in/out and full reassembly with all the above options, taking care to ensure any interlocks are depressed by fully seating backplate.  Nothing.  Nil response whatsoever on attempted power up.   
    Thanks to the suggestions posted above, but the only option is to disassemble and extract the motherboard to see any burnt components as it must have blown.  Shame as a was a well used & lovely laptop.  
    Cheers  R4M

Categories