TC-875-UR13 6-pin board to SATA power cable

vizitor
vizitor Member Posts: 13

Tinkerer
edited March 1 in 2020 Archives
Looking to add an additional B46H5-AD board 6-pin "SATA PWR" to SATA + SATA HDD cable. One came connected to "SATA PWR1" to support the DVD drive + an additional SATA HDD and i'm looking to add the same cable to "SATA PWR2". I can't find a part # to order one, nor any 3rd party option.

Even better would be a cable to feed a 6-pin PCI-E device from that 6-pin board slot - something like a properly wired version of this


, but i doubt the likelihood of finding that. Looks like i'll more likely have to resort to an adapter like this

but i'll need to get power from the board "SATA PWR2" slot to feed it.

I called & also tried to access Acer support chat, but apparently their support system is down, so i can't even get reference to any part #'s for our system.

Any help is appreciated...

Best Answer

  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    Answer ✓
    The Acer part number for the cable is: 50.VQED3.001
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    Answer ✓
    The Acer part number for the cable is: 50.VQED3.001
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • vizitor
    vizitor Member Posts: 13

    Tinkerer
    After a few phone calls to Acer (and a complete lack of response to calls/emails/web.request.submissions @ CapitalDataUSA) i was able to order the 50.VQED3.001.
     Thanks for your help, billseybillsey.
    =)
  • vizitor
    vizitor Member Posts: 13

    Tinkerer
    edited October 2020
    ...duplicate post...
  • vizitor
    vizitor Member Posts: 13

    Tinkerer
    i'm thinking that a JST.XH.6pin.22AWG-to-6pin.PCIe adapter
     would be better than the SATA.PWR-to-PCIe

    , although that actually does work.

    working on that configuration next...

  • vizitor
    vizitor Member Posts: 13

    Tinkerer
    JST.XH.6pin.22AWG-to-6pin.PCIe adapter

    ...made up one of those and it works to power a Radeon RX 570, which fits fine inside the case. i prefer it to the 50.VQED3.001 connected to the video card via the SATA.PWR-to-PCIe adapter, it's a more direct link from the board XH.6-pin power connection without multiple adapters.

Categories