Model: Predator Orion 3000 PO3-600
Part number: DGE1CEQ00801XXXXX
i7 9700
RTX 2060 SUPER, +175 MHz core clock, +800 mem clock, but it is stable and this issue occurred before the OC
So a while back, (3 weeks or so) I realized that my CPU temperatures were quite high, even with what I thought were quite low-resource tasks. The fans weren't running at all, pretty much which also concerned me. I booted into BIOS and turned off Smart Fan, which while it did help, when running tasks like virus-scanning the CPU would go beyond 80 degrees C and then thermal throttle down to 4 GHz, give or take a hundred MHz. This was with the fan running at its highest speed (4500 RPM).
However, because it didn't significantly impact my daily activities, I let it slide. But I still wanted to fix it, and having that fan running at max speed was a little bit annoying because of the noise. I downloaded a third-party program called Argus Monitor to monitor my CPU, GPU and fans, but mostly for fan control. I made a curve, which works quite well, for the System 1 and 2 fans. I also noticed that the CPU fan was detected at 0 RPM, along with the "SYS_FAN3_PUMP" and "CPU_OPT". When I tried to control them, nothing happened, and using the BIOS settings nothing happened either.
Is this normal and are the only fans the Sys 1 and 2 fans, despite that the program could read and "control" the other fans? Help would be much appreciated. Sorry for the messy post, English isn't my first language

Edited the content to hide sensitive information