How can I replace the chassis fans of Predator Orion 3000 (PO3-600)?

FrankBaby
FrankBaby Member Posts: 13

Tinkerer

edited February 15 in 2020 Archives
My Orion 3000 has just arrived. The machine looks good and runs fast. But I am concerned about the fan noise. The bearings or the blades of the front/rear fans emit mechanical noise that makes me feel uncomfortable. I looked into the machine, and it seems that the front/rear fans don't connect directly to the chassis fan slot of the motherboard. If I replace the front/rear fans with third-party PWM fans, what size (diameter) should I use? And how can I connect the new PWM chassis fans to the motherboard or power supply unit?

Intel i7-9700 + Nvidia RTX 2060 + 16GB RAM

Thanks!

Best Answer

  • StevenGen
    StevenGen ACE Posts: 12,165 Trailblazer
    edited April 2020 Answer ✓
    Is your Orion 3000 new and under warranty? If it is then don't open it, take it back to an Acer Service Centre and get them to fix this problem, otherwise you will forfeit your warranty! Otherwise, change the fan with a better case fan e.g. Corsair ML Pro LED, RGB (120mm,140mm) or a Corsair Air Series AF120 – LED High Airflow Fan (Quiet Edition) or a Noctua NF-F12 PWM Chroma x, as these are the best case fans around and more efficient than the OEM that you have. 

    Corsair ML Pro LED, RGB (120mm,140mm)

    Corsair Air Series AF120 – LED High Airflow Fan (Quiet Edition)
    Noctua NF-F12 PWM Chromax


Answers

  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    It looks to me like the case fans should be connected to the SYS_FAN connector, which is adjacent to the CPU_FAN connector near the edge or the MB near the memory slots. Are yours connected differently? I could potentially see them using a daughter board between that connector and the fans themselves so they could be controlled separately...
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    Yeah, it looks like there's a Y cable between the SYS_FAN connector and each set of fan wires:

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • FrankBaby
    FrankBaby Member Posts: 13

    Tinkerer

    Your point should be right. I just know there is something between the chassis fan cables and the SYS_FAN cables, but I cannot see what it is (through the side window) unless I open the chassis. By the way, what size of chassis fans are fit for Orion 3000?

    To eliminate noise, if I unplug chassis fan cables, can Orion 3000 still boot successfully (without fan failure)?
    I know it is not good to unplug case fans (especially the rear fan); I am just curious about it.

    Thanks.
  • StevenGen
    StevenGen ACE Posts: 12,165 Trailblazer
    edited April 2020 Answer ✓
    Is your Orion 3000 new and under warranty? If it is then don't open it, take it back to an Acer Service Centre and get them to fix this problem, otherwise you will forfeit your warranty! Otherwise, change the fan with a better case fan e.g. Corsair ML Pro LED, RGB (120mm,140mm) or a Corsair Air Series AF120 – LED High Airflow Fan (Quiet Edition) or a Noctua NF-F12 PWM Chroma x, as these are the best case fans around and more efficient than the OEM that you have. 

    Corsair ML Pro LED, RGB (120mm,140mm)

    Corsair Air Series AF120 – LED High Airflow Fan (Quiet Edition)
    Noctua NF-F12 PWM Chromax


  • FrankBaby
    FrankBaby Member Posts: 13

    Tinkerer

    StevenGen said:
    Is your Orion 3000 new and under warranty? If it is then don't open it, take it back to an Acer Service Centre and get them to fix this problem, otherwise you will forfeit your warranty! Otherwise, change the fan with a better case fan e.g. Corsair ML Pro LED, RGB (120mm,140mm) or a Corsair Air Series AF120 – LED High Airflow Fan (Quiet Edition) or a Noctua NF-F12 PWM Chroma x, as these are the best case fans around and more efficient than the OEM that you have. 

    Corsair ML Pro LED, RGB (120mm,140mm)

    Corsair Air Series AF120 – LED High Airflow Fan (Quiet Edition)
    Noctua NF-F12 PWM Chromax


    Yes, my Orion 3000 has just come for several days. If I send it to Acer, I guess they will just replace the case fans with the same models?

    If I buy PWM case fans by myself, what size should I choose? 80 or 92mm? Some people said 92mm...
    https://community.acer.com/en/discussion/596124/tutorial-upgrade-predator-orion-p3000

    Thanks. 


  • FrankBaby
    FrankBaby Member Posts: 13

    Tinkerer

    edited April 2020
    In general, case fans have 12V and 5V versions.

    Could you please tell me which version (12V vs. 5V) should I use for Orion 3000?

    Thanks.
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    12V is standard, so I expect that's what is used. It would be really unusual to use a 5V fan in a PC.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Denis14
    Denis14 Member Posts: 9

    Tinkerer

    I changed the exhaust fan to a 92mm be quiet instead of the 80mm. Do you think this will improve the cooling ?
    Is there a way i can control this fan(it has pwm) ? Thanks 🙂
  • billsey
    billsey ACE Posts: 34,234 Trailblazer
    If the fan is connected to the SYS_FAN connector on the motherboard, it should be controlled based on CPU temp. 80mm vs 92mm doesn't change cooling, cooling is changed by different CFMs.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.