Acer V3-372-54B4 Failed RAM upgrade? why

kakubagerald
kakubagerald Member Posts: 3 New User
edited November 2023 in 2020 Archives
The laptop came with 4Gb ram  ddr3 1600MHZ it has 2 ram slots, I went on Newegg and bought 2 RAM cards each of 16GB (total 32GB)the same speed 1600MHZ, I inserted them well but the laptop has failed to start, I don't know the problem.  I want to run intel parallel studio, android studio and visual studio 2019 on this ultrabook.

idont what to do

Best Answer

Answers

  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    edited January 2020
    Sorry. Your machine's RAM max is 16GB. Jack E/NJ


    Jack E/NJ

  • kakubagerald
    kakubagerald Member Posts: 3 New User
    There are two slots inside, should I think each slot maximum is 8 GB?  because even I have put one card 16GB and it has failed to start? meaning i need to go back and buy 2X8GB?
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Answer ✓
    Yes. 2x8GB as advised in the crucial specs. Jack E/NJ


    Jack E/NJ

  • bhchia
    bhchia Member Posts: 1 New User
    this question goes out to ACER community. I want to upgrade my current ram config from x2 sticks of 4GB ram to x2 sticks of 8Gb ram. But have not done it before. Appreciate any advice. Willing to pay ACER official tech support or any 3rd party vendor- if such a service exists. Thanks. 
  • JackE
    JackE ACE Posts: 44,889 Trailblazer
    Easy to do. Remove 12 screws from the bottom case. Pry the bottom case from the top with a credit card. Disconnect the battery from the mainboard. Then spread the two metal RAM hold-down arms (each marked number 1) and the 4GB RAM modules will pop up at an angle and easily pulls out. Push the new 8GB module at the same angle and push it down till the two hold-down arms grab it. Jack E/NJ


    Jack E/NJ