Help I need XMP Profile

TheRedFox47
TheRedFox47 Member Posts: 6

Tinkerer

edited December 2023 in 2020 Archives
I have an acer nitro 5 an515-42 and I want to enable xmp from bios but I only have the original 3 tabs in the advanced section there is another section but I don’t have it which has the memory settings please help meeee my ram is running at 1333hz wtf???

Answers

  • TheRedFox47
    TheRedFox47 Member Posts: 6

    Tinkerer

    Please anyone help me
  • MihaiEVO
    MihaiEVO Member Posts: 72 Devotee WiFi Icon
    The RAM isn't running at 1333MHz, don't worry. It is just running in dual channel, Windows Task Manager splits the frequency in half for dual channel, and in quarters for quad channel. This means you have 2x4GB RAM sticks running at 2666MHz each so there is no reason to be concerned. Unfortunately, some laptop BIOSes don't support XMP. Hope I solved your problem.
  • batmalin
    batmalin Member Posts: 4,231 Guru
    edited July 2020
    Sorry mate but this have nothing to do with channels! DDR means Double Data Rate hence the speed showed in CPU-Z memory tab have to be  x2 to get the real speed.You get two data-ticks per clock cycle.
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • TheRedFox47
    TheRedFox47 Member Posts: 6

    Tinkerer

    MihaiEVO said:
    The RAM isn't running at 1333MHz, don't worry. It is just running in dual channel, Windows Task Manager splits the frequency in half for dual channel, and in quarters for quad channel. This means you have 2x4GB RAM sticks running at 2666MHz each so there is no reason to be concerned. Unfortunately, some laptop BIOSes don't support XMP. Hope I solved your problem.
    Does it mean that advertising of 2666hz is for both sticks or each stick?
  • TheRedFox47
    TheRedFox47 Member Posts: 6

    Tinkerer

    batmalin said:
    Sorry mate but this have nothing to do with channels! DDR means Double Data Rate hence the speed showed in CPU-Z memory tab have to be  x2 to get the real speed.You get two data-ticks per clock cycle.
    Okay ty but do you have any idea I’m getting performance issues or maybe have any tips cause my frames are pretty down the ground
  • TheRedFox47
    TheRedFox47 Member Posts: 6

    Tinkerer

    batmalin said:
    Sorry mate but this have nothing to do with channels! DDR means Double Data Rate hence the speed showed in CPU-Z memory tab have to be  x2 to get the real speed.You get two data-ticks per clock cycle.
    Okay ty but do you have any idea I’m getting performance issues or maybe have any tips cause my frames are pretty down the ground
    batmalin said:
    Sorry mate but this have nothing to do with channels! DDR means Double Data Rate hence the speed showed in CPU-Z memory tab have to be  x2 to get the real speed.You get two data-ticks per clock cycle.
    And ik all the common tips cause xmp was the only I haven’t done is there any secret to getting more frames and don’t worry I have no malware or viruses
  • batmalin
    batmalin Member Posts: 4,231 Guru
    Download and run userbenchmark and post the link here
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • MihaiEVO
    MihaiEVO Member Posts: 72 Devotee WiFi Icon
    @batmalin I'm pretty sure I know what I'm talking about dude. 
    I have 2 ram sticks installed advertised as DDR4 2400MHz. As you can see, 2 of 2 slots used. Speed is half the advertised one. Conclusion? Windows splits the frequency in some multiplier in task manager for some reason (based on the number or slots used, eg 1/2 = 2400 / 1, 2/2 = 2400 / 2). @TheRedFox47 there's no reason to worry as Windows Management Interface says so. Your RAM is running 100% healthy at 2666MHz. For more info read the following article: https://www.reddit.com/r/buildapc/comments/dlpntv/task_manager_showing_ram_at_half_the_speed/
  • MihaiEVO
    MihaiEVO Member Posts: 72 Devotee WiFi Icon
    edited August 2020
    batmalin said:
    Sorry mate but this have nothing to do with channels! DDR means Double Data Rate 
    Also DDR is used for memory type, and you confused what I tried to say. I think i pretty clearly pointed out at RAM Frequency, but not type. Dual Channel means how many sticks of RAM you have installed and running. Eg. Dual Channel = 2 Slots used, Quad Channel = 4 slots used and so on.
  • batmalin
    batmalin Member Posts: 4,231 Guru
    Wow, I don`t like to argue, but when you post an argument to my post, be so kind to read some basic stuff and then come back with facts. 
    Please click "Yes" if I have answered your question.
    Userbench: https://www.userbenchmark.com/UserRun/31177158

  • sri369
    sri369 ACE Posts: 2,822 Pathfinder
    edited August 2020
    @TheRedFox47
    Post the screenshots from memory and spd tabs from CPU-Z.
    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve