Right screw size to open Swift 3 ?

Bottom_up
Bottom_up Member Posts: 5

Tinkerer

edited November 2023 in 2020 Archives
I want to install SSD hard drive in my Acer swift 3 sf315-41-R9S1 [click to see https://bit.ly/3eWUMiX  ]
I tried to open it with this set of screwdriver [click to see https://bit.ly/3huq16L ]
but I failed, Can you please refer me the right screwdriver 

Answers

  • billsey
    billsey ACE Posts: 34,138 Trailblazer
    They are T6 screws, M2.5x6mm. You need a T6 Torx driver or bit.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Bottom_up
    Bottom_up Member Posts: 5

    Tinkerer

    billsey said:
    They are T6 screws, M2.5x6mm. You need a T6 Torx driver or bit.

    Actually, I don't have so I will buy a screwdriver
    Is it the right one , can you look please https://shorturl.at/swKQ6

  • billsey
    billsey ACE Posts: 34,138 Trailblazer
    That URL doesn't seem to work. Here's one from Amazon that should work.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Bottom_up
    Bottom_up Member Posts: 5

    Tinkerer

    billsey said:
    That URL doesn't seem to work. Here's one from Amazon that should work.

    Thank you so much for your kind help
  • billsey
    billsey ACE Posts: 34,138 Trailblazer
    No problem, a lot of users don't have those little Torx bits. That's one of the reasons they use them these days. Tougher to open means less likely to get mucked up when someone opens it. :)
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.