How to remove stripped screws?

ShreyasM912
ShreyasM912 Member Posts: 5

Tinkerer

edited November 2023 in 2020 Archives


Hi guys!

Long story short while I was reapplying the thermal paste and cleaning the fans for the first time in two years I damaged the screws. The cross thing is completely gone (at the screw)
The screws won't open now. Any idea how do I remove the stripped screws? I tried to use a rubber band with the screwdriver but that didn't work.

Does anyone know the measurement of the screws at the heatsink/fan? I think it is M 2.0 x 3.0(?)
My model is helios 300 G3-571. I cant find the screws on the website so i'll get them from the local shop I guess.

Thanks in advance!






Best Answer

  • philetus
    philetus ACE Posts: 4,759 Pathfinder
    Answer ✓
    Try to cover everything except the screw head. Carefully drill down enough to get a small extractor to grab hold, or a bit the size of the screw body and pop off the head of the screw.
     or use a Drimmel tool to cut a slot in the head. 

Answers

  • philetus
    philetus ACE Posts: 4,759 Pathfinder
    Answer ✓
    Try to cover everything except the screw head. Carefully drill down enough to get a small extractor to grab hold, or a bit the size of the screw body and pop off the head of the screw.
     or use a Drimmel tool to cut a slot in the head. 
  • ShreyasM912
    ShreyasM912 Member Posts: 5

    Tinkerer

    Thanks! I wanted to try everything except this, the area is very small.