N50 600 cpu cooler upgrade?

AscendantLag
AscendantLag Member Posts: 29 Troubleshooter
edited December 2023 in 2020 Archives
i want to upgrade my stock cpu cooler to a cool master 103 but the case has rivets on the back of the case so I can’t get behind the mother board to put a bracket on the back. Anyone know if it already has one?

Answers

  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Do you mean the case cooler, not the CPU cooler? Jack E/NJ

    Jack E/NJ

  • AscendantLag
    AscendantLag Member Posts: 29 Troubleshooter
    No cpu cooler 
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    A lot of disassembly is required to access the CPU fan on the mainboard.. You start by removing 2 screws from the side panel. Then the ODD and cables have to be removed along with popping off the plastic bezel. Then the hard drive and its bracket. The list goes on and on till you finally reach the top of the mainboard. Do you really need to do this? Jack E/NJ



    .

    Jack E/NJ

  • AscendantLag
    AscendantLag Member Posts: 29 Troubleshooter
    Yes other wise I wouldn’t be doing it the design for this pre built is awful 
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    I'm not sure if getting the front & top covers off will help any to gain access. If not, further disassembly looks like a nightmare. But once you get  access to the top of the mainboard, the cpu cooler itself is a simple fan held to a separate bracket with four screws. Jack E/NJ




    Jack E/NJ