Windows 10 installation on Aspire 3 A315-55G-51KL does not find ssd even with diskpart - driver?

GerhardDoppler
GerhardDoppler Member Posts: 2 New User
edited October 2023 in 2020 Archives
I bought the Aspire 3 A315-55G-51KL without operating system as I was confident I could install Windows 10 myself.
haha.
I achieved to
1. disable secure boot by setting a supervisor password
2. have my FAT32 :-) pen drive recognized as a boot device
3. can boot from this device and arrive at windows 10 setup.
4. after selecting "Custom: Install Windows only (advanced)" at the question "Where do you want to install Windows" the list stays empty.
5. Shift+ F10 -> diskpart -> list disk -> shows just Disk 0 with 14 GB - this is my pen drive from where I want to install Windows.

I assumed to see the hard drive (ssd 512 GB) here, but do not see it.
Do I need to pack an additional driver to the install pen drive?

I would really appreciate your help!

Answers

  • GerhardDoppler
    GerhardDoppler Member Posts: 2 New User
    ah, in the bios - Information - I find a small strange thing.
    HDD0 Model Name: None
    HDD0 Serial Number: None
    HDD1 Model Name: Kingston Rbusns8154P3512GJ1
    HDD1 Serial Number: 500 ...
    SATA Mode: RST with Optane

    Could it simply be that the ssd is plugged in on the wrong socket?
    Bought it already assembled, though ...
  • ArturoBandini
    ArturoBandini Member Posts: 1 New User
    Hello, same problem here, did you solve?