SF314-52 Swift 3 Lid / Screen cover replacement

Paul29
Paul29 Member Posts: 4 New User
The screen cover on my Swift 3 has a couple dents in it that are really bugging me. I’ve found a replacement cover but I can’t find any disassembly instructions with regards to the screen and it’s a bezel less design.
has anyone got any knowledge of this or is there a way of accessing an Acer repair manual ?

Answers

  • billsey
    billsey ACE Posts: 34,944 Trailblazer
    Are you talking about the back cover to the screen? It's pretty involved, you have to take it fully apart since the last item in the sequence just leaves the back cover. :)
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Paul29
    Paul29 Member Posts: 4 New User
    Yes the metal back cover with the Acer logo in the centre. I have replaced back covers on Dell and HP laptops before where they have a bezel that unclips and with them you also have to dissasemble the laptop. I'm just a bit confused as to how the back cover is held to the screen with this model being bezel less.
  • billsey
    billsey ACE Posts: 34,944 Trailblazer
    It looks fairly normal, once the screen is off the main system you pull the hinges off, pull out the DC power board, pry off the hinge cap (the plastic cover that runs between the two hinges) and then the screen and bezel itself is pried off. It's not held with screws, just the plastic clips. The  you have the antenna cables, eDP cable and the camera and cable.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Paul29
    Paul29 Member Posts: 4 New User
    How does the screen separate from the back cover? There is no bezel to prise off to reach screws that would normally hold the screen to the back cover. 
    I have attached photos to show that it is bezel less. Are you saying it is clipped onto the screen and you prise the back cover away from the screen?

    Thanks again
  • billsey
    billsey ACE Posts: 34,944 Trailblazer
    Yeah, the black "not bezel" is connected to the silver back cover by plastic latches, this might help:

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Paul29
    Paul29 Member Posts: 4 New User
    Thank you for your help and support with this billsey. Do you have a link to the dissasembly instructions that the images came from?
  • billsey
    billsey ACE Posts: 34,944 Trailblazer
    No, those manuals aren't allowed to be distributed to the public. We can share snippets, but not the whole thing.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • irajeshmohan
    irajeshmohan Member Posts: 1 New User

    Where to get this Replacement ? Top Lid Cover / Mid Keyboard Cover / Bottom Cover

  • billsey
    billsey ACE Posts: 34,944 Trailblazer

    It depends on where you are. If we know what specific model you have, what color case you have and what language is used for the keyboard we can look up the part numbers for you.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :)