Is there any good software that can help me control the fan speed of my Acer predator Helios 300?

TempestJax
TempestJax Member Posts: 17 Troubleshooter
edited November 2023 in 2020 Archives
For a while now I think my gpu fan has started to die on me and makes a terrible buzz buzz type noise it eventually goes away after the fan picks up speed I have seen it on the predator sense so now the solution I've settled on is to make the fans speed up myself any suggestions on software msi afterburner had the fan control grayed out so I couldn't use that one and also any recommended speeds I should have it on with suggested softwares

Best Answer

  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited March 2020 Answer ✓
    TempestJax unfortunately no only PS as @MaClane stated above and i have tested loads of software including a script made by a user here and doesnt work on mine (not sure about others) this is due to the fan control comes directly from the bios and only PS has direct access to the bios to control the fans if you have a H300 2019 and you wanted to lower the fan speed unfortunately its not possible either the fan curve was designed to be more aggressive to provide better cooling/performance and the fans will not stop as they do under 40 degrees on the older 2017/18 H300 and on the T500 if i record on the 2019 the fans would only go idle under a stable temp of 35/37 degrees which that will never happen if its because of the noise as the aeroblade 4th gen owl wing tip fans tend to be noisy on idle probably the only fix i had seen was to replace them with plsatic delta fans but of course you will void/loose your warranty if you do this anyway hope any of this helps 


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


Answers

  • MaClane
    MaClane ACE Posts: 35,598 Trailblazer
    Good evening TempestJax !

    As the ventilation system is proprietary to Acer, virtually any software other than Sense will have direct access to the controllers of the fans.
    Why not use Sense to control and speed up?


    Se minha resposta foi útil, deixe um Curtir, marque como Solucionado e clique em Promover!
    Caso contrario, fico a disposição para tentarmos sanar suas duvidas e resolver seus problemas!
    Atenciosamente:  J. MaClane™

    If my answer was helpful, leave a Like, flag as Fixed and click Promote!
    Otherwise, I am willing to try to heal your doubts and solve your problems!
    Sincerely, J. MaClane ™


    For users of the English, Spanish, French and German Community, I will be using Google Translate!
              
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited March 2020 Answer ✓
    TempestJax unfortunately no only PS as @MaClane stated above and i have tested loads of software including a script made by a user here and doesnt work on mine (not sure about others) this is due to the fan control comes directly from the bios and only PS has direct access to the bios to control the fans if you have a H300 2019 and you wanted to lower the fan speed unfortunately its not possible either the fan curve was designed to be more aggressive to provide better cooling/performance and the fans will not stop as they do under 40 degrees on the older 2017/18 H300 and on the T500 if i record on the 2019 the fans would only go idle under a stable temp of 35/37 degrees which that will never happen if its because of the noise as the aeroblade 4th gen owl wing tip fans tend to be noisy on idle probably the only fix i had seen was to replace them with plsatic delta fans but of course you will void/loose your warranty if you do this anyway hope any of this helps 


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • TempestJax
    TempestJax Member Posts: 17 Troubleshooter
    I have tried PS, but it doesn't seems to speed it up I have tried adjust it to speed up and it simply won't so thanks I guess ill just have to always let it do it on its own
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    TempestJax you can probably try to uninstall it completely and reinstall it check here  as i could be buggy because on manual you should be able to control the fans but only according to the fan curve/temps also when you hit max dont the fans go to max ??


    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • archionius
    archionius Member Posts: 1 New User
    xapim said:
    TempestJax unfortunately no only PS as @MaClane stated above and i have tested loads of software including a script made by a user here and doesnt work on mine (not sure about others) this is due to the fan control comes directly from the bios and only PS has direct access to the bios to control the fans if you have a H300 2019 and you wanted to lower the fan speed unfortunately its not possible either the fan curve was designed to be more aggressive to provide better cooling/performance and the fans will not stop as they do under 40 degrees on the older 2017/18 H300 and on the T500 if i record on the 2019 the fans would only go idle under a stable temp of 35/37 degrees which that will never happen if its because of the noise as the aeroblade 4th gen owl wing tip fans tend to be noisy on idle probably the only fix i had seen was to replace them with plsatic delta fans but of course you will void/loose your warranty if you do this anyway hope any of this helps 
    How do I edit the fan curve? I get like 95 degrees even on coolboost 5200 fan speed but I get like 75 degrees when I max out the fan. I don't wanna max out but keep the fan at 5900 so that the fans dont wear out when max is 6122. I have used Grizzly thermal paste.