Monitor - G277HL bid Base Screws

heman123456
heman123456 Member Posts: 4 New User
edited February 21 in 2020 Archives
I have a G277HL bid mfg date of July 2017, and I've purchased a 3rd party mount from vivo. But the screws that come with the monitor are not long to go through both. 
I'm speaking of the screws in the base column of the original base stand.

 I went to lowes and a couple of hobby stores Michael's and Hobby Lobby I am not seeing any compatible screw the is a bit longer. It looks like mine is about 1/4 in to short.

Anyone know the size so I can shop for longer ones, please?

@M@MaClane

Answers

  • heman123456
    heman123456 Member Posts: 4 New User
    Upvote for the health of it!

    @MaClane
  • heman123456
    heman123456 Member Posts: 4 New User
    I would really love to just get the size information so I can get some of these screws.. why must this be so complicated
  • billsey
    billsey ACE Posts: 34,246 Trailblazer
    While you are at Lowes or another hardware store, measure the screws to see the size that they are now. I'd guess they are M5, but might be M$ or M6. Then you measure from the bottom of the screw head to the end of the screw to find the length. Pick up new ones that are either 5mm longer or 10mm longer. If they end up a couple of mm too long try putting a washer or two in the make up the difference.
    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.