Aspire r3 131 t not powering on

IquagMire69
IquagMire69 Member Posts: 1 New User
edited August 2023 in 2019 Archives
After a battery reset, I plug in the power cord and the charging indicator starts blinking and whenever I press the power button, the blue light comes on and turns off within 4 seconds, and nothing works whenever the power cord isn't plugged in...

Answers

  • MartinJohn00001
    MartinJohn00001 Member Posts: 636 Seasoned Specialist WiFi Icon
    Hi, sorry to hear it. Kindly try power drain by following the below steps.

    Power Drain
    **********
    1)Unplug the AC power adapter.
    2)Press and hold the Power button down until the unit goes off. 
    3)Search for a pinhole that has a battery symbol next to it on the backside of your laptop, insert a small paperclip in the battery reset pinhole, press and hold it down for 25 seconds. Then release the paperclip and try to turn on the unit and check.

    If this does not work, try to enter into the BIOS screen and reset the BIOS to default settings by the following steps.

    RESET BIOS
    ***********
    1.Turn off the unit. When the unit is off completely, press the power to turn on the unit.
    2.Immediately keep on tapping the F2 to enter the BIOS.                               
    3.In the BIOS, press F9 to reset the BIOS to setup defaults.
    4.At the confirmation screen, press Enter for Yes to load the default configuration.
    5. Press F10 to save your changes, and restart the system. Select Yes and press ENTER to confirm.

    If you are unable to enter even into the BIOS and if you feel that the unit is under warranty, check the link below and choose your location and contact the support in your location.

    http://www.acer.com/worldwide/support/

    Kindly click "YES" to "Did this answer the question" if my answer helped you!      
    Thank you and have a Blessed Day  :3
  • Appleteck5097
    Appleteck5097 Member Posts: 18 Troubleshooter
    edited September 2019
    1 remove battery try to press and hold power key for more than 20 second if not happen then remove its ram clean its point may be it will help you if you need any hardware advice then most welcome , i will try my best