Helios 300 Freezes when moved

alphakiller
alphakiller Member Posts: 8

Tinkerer

edited November 2023 in 2020 Archives
When I move my laptop, it suddenly freezes and this weird thing shows up on screen. 

Answers

  • Jack22
    Jack22 ACE Posts: 4,170 Pathfinder
    @alphakiller
    There might the problem with the hinges that connect the screen to keyboard. but you can try doing power drain but still if you have the issue I guess you need to call Acer Tech support. Please check the below link for Acer tech support:
    http://www.acer.com/worldwide/support/
    Click on 'Yes' if the comment answers your question!
  • Jack22
    Jack22 ACE Posts: 4,170 Pathfinder
    @alphakiller
    Try these steps and check :
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 sec.
    BIOS default: After power drain is done, power on the unit, but as soon as you power on the unit keep pressing the F2 key so that it take you to BIOS page. Press F9 and press Enter than press F10 and press Enter. the unit will restar:-1:
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • alphakiller
    alphakiller Member Posts: 8

    Tinkerer

    Jack22 said:
    @alphakiller
    Try these steps and check :
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 sec.
    BIOS default: After power drain is done, power on the unit, but as soon as you power on the unit keep pressing the F2 key so that it take you to BIOS page. Press F9 and press Enter than press F10 and press Enter. the unit will restar:-1:
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 

    Click on 'Yes' if the comment answers your question!
    It doesn't look like a screen problem to me beacuse the laptop just freezes completely and then I have to hold the power button to turn it off. I also noticed that it only happens when you put pressure where the ram cover is. Is it because of the switch that needs to be pressed all the time and when unpressed this happens?
  • xapim
    xapim ACE Posts: 7,253 Pathfinder
    edited December 2018
    Jack22 said:
    @alphakiller
    Try these steps and check :
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 sec.
    BIOS default: After power drain is done, power on the unit, but as soon as you power on the unit keep pressing the F2 key so that it take you to BIOS page. Press F9 and press Enter than press F10 and press Enter. the unit will restar:-1:
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 

    Click on 'Yes' if the comment answers your question!
    It doesn't look like a screen problem to me beacuse the laptop just freezes completely and then I have to hold the power button to turn it off. I also noticed that it only happens when you put pressure where the ram cover is. Is it because of the switch that needs to be pressed all the time and when unpressed this happens?
    That is the security safety power switch in the ram compartment the pc will not work with the compartment open (it's a safety precaution most laptops also have pressure switches along the chassis) or not properly closed try to screw it properly if it still does the same it means the door it's not pressing the kill switch properly try to get something between to get it properly pressed check this thread

    https://community.acer.com/en/discussion/551253/since-yesterday-my-laptop-has-been-dead



    https://www.userbenchmark.com/UserRun/11532543

    UserBenchmarks: Game 43%, Desk 61%, Work 40%
    CPU: Intel Core i5-7300HQ - 63.5%
    GPU: Nvidia GTX 1050-Ti (Mobile) - 41.9%
    SSD: WDC WDS200T2B0B-00YS70 2TB - 71.4%
    HDD: WD WD10SPZX-00HKTT0 1TB - 93.7%
    RAM: Kingston HyperX DDR4 2666 C15 2x16GB - 76.8%
    MBD: Acer Predator G3-572

    I'm not an Acer employee. (just here to help in the best way i can)
    If my answer fixed you issue please accept it for any other users who search for it would find it quickly thanks :)
    If you want to learn more about undervolting/optimizing windows join the Predator fb group and youtube channel:

    Owner/Admin (HOTEL HERO/Red-Sand/Opoka Opoka)
    https://www.facebook.com/groups/PredatorHelios300
    https://www.youtube.com/channel/UCNJwGUHxSJ8FKqAhnOqQuAw
    Acer support:
    https://www.acer.com/ac/en/US/content/service-contact
    http://www.acer.com/worldwide/support/  


  • Agent_K
    Agent_K Member Posts: 1 New User
    Hi AlphaKiller, my laptop have the same issue. Did you found a solution to it?
  • OmkarS
    OmkarS Member Posts: 1 New User
    edited November 2020
    I too was facing same issue. Firstly I thought it might be due to the kill switch located near the ram slot but after many days of continuous search for the solution I finally found that the issue was due to the bad RAM stick. The stick was working fine but after slightly flexing, it freezed the laptop with weird artifacts on screen (confirmed it with repeated testing). So do make sure to check out the RAM sticks if they have problem or the RAM slots have any problem along with the kill switch.
  • mmg1
    mmg1 Member Posts: 1 New User
    I have the same problem and I have not found a solution to it yet. What might be the solution
  • Samuel-Acer
    Samuel-Acer Moderator Posts: 703 Moderator
    Hi @mmg1,

    Thank you for joining Acer community.

    Here you can share your ideas, solutions and ask a question. 

    It looks like you have commented in a older post. This may not get much attention from our community members. We request you to create a new topic by mentioning the issue in detail along with the unit model number. 

    This would help users to address your concern at the earliest.

    Note: This thread will now be closed.

    Regards,
    Acer-Samuel
This discussion has been closed.