How to access RAM aspire v3 - 572pg

Gregw
Gregw Member Posts: 3 New User
edited September 2023 in 2019 Archives
i want to upgrade the Ram on my aspire v3 572pg 
how do I remove the back to access the RAM
this model
had the external battery 

Best Answer

  • JackE
    JackE ACE Posts: 45,090 Trailblazer
    Answer ✓
    As far as I can tell, this particular model requires quite a bit of work to get at the RAM slots because the bottom screws only release the top cover. The bottom cover remains attached to the mainboard with internal screws which also must be removed along with the HDD. WLAN, LCD & KB ribbon cables in order to get at the slots on the other side of the mainboard. Not a convenient design. Google 'v3-572' 'disassembly' 'ram' to see what you'll be up against for virtually the same model. https://community.acer.com/en/discussion/308142/v3-572g-disasembly-need-help
    If it were mine, I think the biggest and easiest bang for the buck would be to replace the HDD with an SSD rather than try to add more RAM.

    Jack E/NJ   

    Jack E/NJ

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,593 Trailblazer
    Hi,
    You may have to do a complete disassembly to access the memory slot, the procedure could be similar to one in this video:https://www.youtube.com/watch?v=2E5TRRpJG-w
  • Jack22
    Jack22 ACE Posts: 4,177 Pathfinder
    @Gregw



    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • Gregw
    Gregw Member Posts: 3 New User
    Thank u 
    I did try that - but had probs getting it apart 
    I thought there may be something I am missing ???
  • JackE
    JackE ACE Posts: 45,090 Trailblazer
    Answer ✓
    As far as I can tell, this particular model requires quite a bit of work to get at the RAM slots because the bottom screws only release the top cover. The bottom cover remains attached to the mainboard with internal screws which also must be removed along with the HDD. WLAN, LCD & KB ribbon cables in order to get at the slots on the other side of the mainboard. Not a convenient design. Google 'v3-572' 'disassembly' 'ram' to see what you'll be up against for virtually the same model. https://community.acer.com/en/discussion/308142/v3-572g-disasembly-need-help
    If it were mine, I think the biggest and easiest bang for the buck would be to replace the HDD with an SSD rather than try to add more RAM.

    Jack E/NJ   

    Jack E/NJ

  • Gregw
    Gregw Member Posts: 3 New User
    Thanks Jack 
    that is what I was concerned about 
    It’s a terrible design !