cpu fan speed is always idel in aspire f15
vivekkn91
Member Posts: 23 Troubleshooter
my acer aspire fan speed doesnot increses even at high temprature it keeps running at same speed even when playing games at the proccesor get heated up realquick drivers are all installed
0
Answers
-
Fan speed doesn't vary much for this model as shown below. It would be hard to tell the difference by ear for modest load temps. Jack E/NJ
Jack E/NJ
0 -
when i first brought this device fan used to go at high speed during gaming now i have changed my os from windows 10 to linux and now back to windows 10 now the speed does not incresese
also atleast 1s daily my laptop goes off suddenly middile of working even when the tempreature is not high at all sometimes its goes working to its peak temprature and goes off
0 -
Did you reinstall the ACER version of Win 10 from the hidden ACER recovery partition or the Microsoft generic version of Win10? Jack E/NJ
Jack E/NJ
0 -
no i lost that file i used a windows 10 disk0
-
Win10 disk From ACER or Win10 disk from Microsoft? They are not the same. Jack E/NJ
Jack E/NJ
0 -
win10 from microsoft0
-
Go to this link http://www.acer.com/ac/en/US/content/driversEnter your machine's full model number and download and try the apps that might be available for your model. You might also want to try some of the ACER chipset drivers. Jack E/NJ
Jack E/NJ
0 -
@JackE hello jacke i did update all the drivers from the acer website still the probelem contiunes. the system keeps going off suddenly and sometimes it says "no bootable drive" when i restart it then i have to change to utfi to legasy mode in boot menu in order to make the system running again0
-
>>> i restart it then i have to change to utfi to legasy mode in boot menu in order to make the system running again >>>This is the problem!!! You must completely re-install Win10 with UEFI bootstrapper, NOT Legacy BIOS. In order to do this, your HDD must be GPT partitioned, NOT MBR-partitioned. You must've changed to MBR when you installed Linux because you used an MBR FAT32 Linux USB installation. You should have used a GPT FAT32 Linux USB installation. Jack E/NJ
Jack E/NJ
0
