My acer nitro 5 with 7th gen i5 and gtx 1050ti in windows 10 showing blue screen frequently !

Shafiqur016
Shafiqur016 Member Posts: 2 New User
edited November 2023 in 2019 Archives
my acer nitro 5 with 7th gen i5 and gtx 1050ti model in windows is showing blue screen frequently! And after that when it restarts it shows no bootable device! I have checked the bios and tweaked the Uefi setting too or have make the bios reset as well but no help! Its not always that no bootable device message shows. Sometimes it does boot but after 10-15 minutes it shows blue screen again and restarts with the message no bootable device! I have cleaned installed windows 10 multiple time but it happens everytime! Plz help me with this! I have 16gb ram and 240gb nvme ssd as well! I tried installing windows in 1tb hdd but it shows blue screen in the boot screen but when i go to bios and then restarts then it loads windows and no such blue screen again! But everytime i have to go to bios for that to boot windows if its installed in hdd! But in ssd it boots then after 5-10 minutes blue screen shows and then the message no bootable device. 

Answers

  • MartinJohn00001
    MartinJohn00001 Member Posts: 636 Seasoned Specialist WiFi Icon
    my acer nitro 5 with 7th gen i5 and gtx 1050ti model in windows is showing blue screen frequently! And after that when it restarts it shows no bootable device! I have checked the bios and tweaked the Uefi setting too or have make the bios reset as well but no help! Its not always that no bootable device message shows. Sometimes it does boot but after 10-15 minutes it shows blue screen again and restarts with the message no bootable device! I have cleaned installed windows 10 multiple time but it happens everytime! Plz help me with this! I have 16gb ram and 240gb nvme ssd as well! I tried installing windows in 1tb hdd but it shows blue screen in the boot screen but when i go to bios and then restarts then it loads windows and no such blue screen again! But everytime i have to go to bios for that to boot windows if its installed in hdd! But in ssd it boots then after 5-10 minutes blue screen shows and then the message no bootable device. 
    Hi, are you sure that the hard-drive is not getting detected in the BIOS?

    Kindly click "YES" to "Did this answer the question" if my answer helped you!      
    Thank you and have a Blessed Day  :3
  • Shafiqur016
    Shafiqur016 Member Posts: 2 New User
    my acer nitro 5 with 7th gen i5 and gtx 1050ti model in windows is showing blue screen frequently! And after that when it restarts it shows no bootable device! I have checked the bios and tweaked the Uefi setting too or have make the bios reset as well but no help! Its not always that no bootable device message shows. Sometimes it does boot but after 10-15 minutes it shows blue screen again and restarts with the message no bootable device! I have cleaned installed windows 10 multiple time but it happens everytime! Plz help me with this! I have 16gb ram and 240gb nvme ssd as well! I tried installing windows in 1tb hdd but it shows blue screen in the boot screen but when i go to bios and then restarts then it loads windows and no such blue screen again! But everytime i have to go to bios for that to boot windows if its installed in hdd! But in ssd it boots then after 5-10 minutes blue screen shows and then the message no bootable device. 
    Hi, are you sure that the hard-drive is not getting detected in the BIOS?Yes, i am sure! I checked it in the bios this only happens when the blue screen appears and it restarts with the message no bootable device. But it can detect the other storage option where windows is not installed. Either way after i force turnoff the laptop, sometime it does boot and shows the hard drives and ssd in the bios too. This problem is very annoying! Can u please help! 
  • Ivyli
    Ivyli Member Posts: 14

    Tinkerer

    if you receive no bootable device on acer, it may be caused either by incorrect boot order, inactive partition, hard disk failsure or corrupted MBR. 
    you can insert the Windows installation disc and boot from it, then open command prompy via Shift + F10 and type diskpart -> select disk 0 -> list partition 1 -> active.
    also, you can try to type these commands and repair mbr: 
    bootrec /fixmbr
    bootrec /fixboot
    bootrec /scanos
    bootrec /rebuildbcd
  • Storyteller45
    Storyteller45 Member Posts: 2 New User
    my screen turns blue whenever I change screen positions and stays that way with lines running across the screen.
  • Storyteller45
    Storyteller45 Member Posts: 2 New User
    Now it flashes on and off so much Ic an hardly use it at all. I have a defective machine. How can I send it back?
  • andylb
    andylb ACE Posts: 3,827 Pathfinder
    Now it flashes on and off so much Ic an hardly use it at all. I have a defective machine. How can I send it back?

    Contact Acer support for your region for repair instructions

    Please click YES if I answered your question

    I am not an ACER employee
    Thank you and have a blessed day  B)

    ★★ ACE Pathfinder 2019★★