how can I fix...

Stauns_7
Stauns_7 Member Posts: 20 Networker
edited November 2023 in 2019 Archives
the other day  I ran outta battery and my PC just turned off. when I got back power it had this problem that if I am using it on power and I pull out the charger it shows the bluescreen of death then it restarts. PLEASE HELP

Best Answer

  • Jack22
    Jack22 ACE Posts: 4,095 Pathfinder
    edited January 2019 Answer ✓
    @Stauns_7
    Try and let us know ..

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!

Answers

  • Jack22
    Jack22 ACE Posts: 4,095 Pathfinder
    edited January 2019
    Stauns_7
    Model number of the unit ?
    power drain: Just check the back of the unit, you can find a pin hole , unplug the charger and turn off the unit. now put a paper clip in the small pin hole and press and hold it for 30 sec.
    BIOS default: After power drain is done, power on the unit, but as soon as you power on the unit keep pressing the F2 key so that it take you to BIOS page. Press F9 and press Enter than press F10 and press Enter. the unit will restart

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • Stauns_7
    Stauns_7 Member Posts: 20 Networker
    Nitro AN515-41

    sure I am going to try that, thanks a lot 
  • Jack22
    Jack22 ACE Posts: 4,095 Pathfinder
    edited January 2019 Answer ✓
    @Stauns_7
    Try and let us know ..

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!
  • Stauns_7
    Stauns_7 Member Posts: 20 Networker
    hey man, I tried it and didn't work  :(
  • Jack22
    Jack22 ACE Posts: 4,095 Pathfinder
    @Stauns_7
    1. Updated the BIOS
    2. Remove the memory compartment and reattached the cover, tightening all the screws.

    Click on 'Yes' if the comment answers your question!
    Click on 'Yes' if the comment answers your question!