Aspire XC-885 what settings do I use to optimise an SSD.

Phil123
Phil123 Member Posts: 8

Tinkerer

edited March 1 in 2018 Archives
I have just fitted a Kingston 480 Gb. SSD and want to ensure that everything is set up correctly. I cloned my Hard Drive externally in a USB caddy using EaseUS Todo free version and then fitted it into the PC using the M2 SATA connector under the HDD case.  It boots fine from the SSD but the various articles that I have read suggested that I should set "Trim" to on and use optimise for SSD. These options did not appear in the cloning software. Can anyone tell me what I should do to get the best performance/life from the SSD. I would really appreciate it if someone could direct me to a general article that would give me this information. I did not need to remove the Intel Optain memory card as some have suggested.
Thanks in anticipation.
PXW

Best Answer

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,596 Trailblazer
    Answer ✓
    Hi,
    If you are booting with Kingston 480GB SSD, you don't need a Intel Optane memory, you don't need to do any optimisation for SSD, please install Crystal DiskMark benchmark program and post the results.
    http://crystalmark.info/en/software/crystaldiskmark/
  • Phil123
    Phil123 Member Posts: 8

    Tinkerer

    Thanks BF2 Here is the Crystalmark info - is that what you would expect?
    -----------------------------------------------------------------------
    CrystalDiskMark 6.0.2 x64 (C) 2007-2018 hiyohiyo
                              Crystal Dew World : https://crystalmark.info/
    -----------------------------------------------------------------------
    * MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
    * KB = 1000 bytes, KiB = 1024 bytes

       Sequential Read (Q= 32,T= 1) :   525.153 MB/s
      Sequential Write (Q= 32,T= 1) :   456.335 MB/s
      Random Read 4KiB (Q=  8,T= 8) :   245.468 MB/s [  59928.7 IOPS]
     Random Write 4KiB (Q=  8,T= 8) :   285.140 MB/s [  69614.3 IOPS]
      Random Read 4KiB (Q= 32,T= 1) :   189.543 MB/s [  46275.1 IOPS]
     Random Write 4KiB (Q= 32,T= 1) :   104.107 MB/s [  25416.7 IOPS]
      Random Read 4KiB (Q=  1,T= 1) :    27.918 MB/s [   6815.9 IOPS]
     Random Write 4KiB (Q=  1,T= 1) :    51.772 MB/s [  12639.6 IOPS]

      Test : 1024 MiB [C: 20.0% (49.1/245.0 GiB)] (x5)  [Interval=5 sec]
      Date : 2018/12/30 13:55:26
        OS : Windows 10  [10.0 Build 17134] (x64)