M.2 not showing in my Acer SF113-31-P8ZN

Mohd168
Mohd168 Member Posts: 6

Tinkerer

edited November 2023 in 2018 Archives
Hi,

I just added a WD Black 250GB NVMe PCIe M.2 2280 SSD to my Acer Swift 1 ( SF113-31-P8ZN ) and i'm trying to install windows 10 but nothing showing!

Best Answer

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder
    edited October 2018
    Mohd168
    Is the SSD detected in BIOS?
    Please create a USB recovery media before making any changes on your laptop. Use the following steps to create a USB Recovery Drive using Acer Care Center:
    Click the Start  menu. Click All Apps. Click the Acer folder, then click Acer Recovery Management. Click the Backup tab.
    Click Get Started to the right of Create Factory Default Backup. Insert a 16 GB USB drive into your system.
    Make sure there is a check in the box next to Back up system files to the recovery drive and click Next.
    Select the drive you wish to create the USB recovery drive to and click Next. Click Create. Click Finish.

    To transfer your OS to SSD.
    Please follow the steps below and see whether it helps:
    1.Download and install Minitool partition wizard free.
    2. Install the SSD and use Migrate feature to transfer the contents of HDD to SSD.
    3. Go to BIOS and change the boot order to make the SSD as your first boot device.
    4. Make sure the migration was successful, then format the HDD and use it for storage.
    You can also remove the HDD and use the laptop only with the SSD after the migration completed, if you prefer.
    https://www.minitool.com/partition-manager/partition-wizard-home.html
    https://www.minitool.com/help-pw/migrate-os-to-ssd-hd.html

    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!
  • brummyfan2
    brummyfan2 ACE Posts: 28,469 Trailblazer
    Hi,
    I don't think a NVMe SSD is compatible with your model.
  • IVAN_PC
    IVAN_PC ACE Posts: 7,570 Pathfinder
    Hi.

    Storage Subsystem
    Solid State drive
    M.2 2280 128GB/256GB
    SATA SSD (SATA 3.0)

    According to the service manual, your computer supports SATA 3, apparently it does not support PCIe.

    Regards.



    ☑️ 𝑺𝒊 𝒆𝒔𝒕𝒂 𝒆𝒔 "𝒍𝒂 𝒓𝒆𝒔𝒑𝒖𝒆𝒔𝒕𝒂", 𝒉𝒂𝒛 𝒄𝒍𝒊𝒄 𝒆𝒏 "𝑨𝒄𝒆𝒑𝒕𝒂𝒓 𝒍𝒂 𝒔𝒐𝒍𝒖𝒄𝒊ó𝒏" 𝒑𝒂𝒓𝒂 𝒂𝒚𝒖𝒅𝒂𝒓 𝒂 𝒐𝒕𝒓𝒐𝒔 𝒂 𝒆𝒏𝒄𝒐𝒏𝒕𝒓𝒂𝒓𝒍𝒂.
    ☑️ 𝑬𝒍 𝒇𝒐𝒓𝒐 𝑨𝑪𝑬𝑹 𝒄𝒐𝒎𝒎𝒖𝒏𝒊𝒕𝒚 𝒕𝒊𝒆𝒏𝒆 𝒖𝒏 𝒂𝒎𝒃𝒊𝒆𝒏𝒕𝒆 𝒂𝒈𝒓𝒂𝒅𝒂𝒃𝒍𝒆 𝒅𝒐𝒏𝒅𝒆 𝒕𝒐𝒅𝒐 𝒆𝒍 𝒎𝒖𝒏𝒅𝒐 𝒆𝒔 𝒃𝒊𝒆𝒏𝒗𝒆𝒏𝒊𝒅𝒐.
  • Mohd168
    Mohd168 Member Posts: 6

    Tinkerer

    Sharanji said:
    Mohd168
    Is the SSD detected in BIOS?

    Hi, No.

  • Mohd168
    Mohd168 Member Posts: 6

    Tinkerer

    @brummyfan2
    @IVAN_PC

    My M.2 fit perfectly 100% with my model but i'm not sure if it compatible with it.
  • brummyfan2
    brummyfan2 ACE Posts: 28,469 Trailblazer
    Answer ✓
    Hi,
    Yes, both types of M.2 SSDs will physically fit in the slot but it won't recognise NVMe SSD.
  • Mohd168
    Mohd168 Member Posts: 6

    Tinkerer

    @brummyfan2 So is this can simply fixed in future bios update or not happn at all and i have to sell my M.2?

    Many Thanks!
  • brummyfan2
    brummyfan2 ACE Posts: 28,469 Trailblazer
    Mohd168 said:
    @brummyfan2 So is this can simply fixed in future bios update or not happn at all and i have to sell my M.2?

    Many Thanks!
    Hi,
    I am afraid that you have to sell it because I doubt very much that Acer will update BIOS for it.