SCROOLING IS NOT WORKING IN NITRO AN515-51.

MILANPATEL
MILANPATEL Member Posts: 19 Troubleshooter
edited November 2023 in 2018 Archives
SCROOLING IS NOT WORKING IN NITRO AN515-51.I INSTALLED ''Synaptics TOUCHPAD  DRIVER BUT STILL NOT WORKING

Best Answer

  • Jack22
    Jack22 ACE Posts: 4,099 Pathfinder
    Answer ✓
    Hi,

    Try power drain and BIOS default
    power drain: Shut down the unit and unplug the charger. flip your laptop, and the back of your laptopyou can find a pin hole. Pu a paperclip in the pinhole and press and hold the paper clip for 40 seconds. After you done with power drain do BIOS DEFAULT.

    BIOS Default: As soon as you press the power button keep pressing the F2 key, so that it will take you to BIOS utility page. Now press F9 and press enter than press f10 and press enter. your unit will restart.

    If it dont work than try this


    Go to BIOS settings(press F2 as soon as you press the Power button), go to Main tab and switch Touchpad mode from Basic to Advanced.



    Click on 'Yes' if the comment answers your question!

Answers

  • Jack22
    Jack22 ACE Posts: 4,099 Pathfinder
    Answer ✓
    Hi,

    Try power drain and BIOS default
    power drain: Shut down the unit and unplug the charger. flip your laptop, and the back of your laptopyou can find a pin hole. Pu a paperclip in the pinhole and press and hold the paper clip for 40 seconds. After you done with power drain do BIOS DEFAULT.

    BIOS Default: As soon as you press the power button keep pressing the F2 key, so that it will take you to BIOS utility page. Now press F9 and press enter than press f10 and press enter. your unit will restart.

    If it dont work than try this


    Go to BIOS settings(press F2 as soon as you press the Power button), go to Main tab and switch Touchpad mode from Basic to Advanced.



    Click on 'Yes' if the comment answers your question!
  • MILANPATEL
    MILANPATEL Member Posts: 19 Troubleshooter
    edited September 2018
    it's working .thanks man..