How do I remove the GPU in my AG3-710-EB12?

somecanuck
somecanuck Member Posts: 4 New User
edited February 15 in 2018 Archives
I can't seem to remove it from the PCIe slot, is there something I'm missing? 

And while I'm at it, anything else needed to know when replacing the motherboard on this PC?

Answers

  • somecanuck
    somecanuck Member Posts: 4 New User
    I assume there's a retention clip that needs to be released, but the graphics card obscures everything and I don't know how to get to it.
  • RanY2J
    RanY2J Member Posts: 599 Seasoned Specialist WiFi Icon
    If this is PCI Express 2.0 and above, there is a little plastic click that you can clip and move to the left to eject the card.

    https://www.youtube.com/watch?v=Ysk8d_kRg0o&t=58s

    If this is not:

    Complete Hardware Guide here:

    https://www.youtube.com/watch?v=_yvKjakrpN4
    BElieve in YOUrself.
  • somecanuck
    somecanuck Member Posts: 4 New User
    I don't know for sure, but I think it's the latch displayed here:

    (Ignored the circled part)

    Also how much pressure is required to get the RAM back into place? I thought it would give me more room to work with but it didn't help much, and the locks aren't snapping back into place.
  • somecanuck
    somecanuck Member Posts: 4 New User
    Nevermind the RAM bit. 
  • RanY2J
    RanY2J Member Posts: 599 Seasoned Specialist WiFi Icon
    The circled part is called PWM pins, they are generally used to connect extra fans on to your motherboard. Your PSU fan will run off the right side power switch (While colour teeth like pins) and your GPU goes into either the black or white slot as PCI express, you go with black. Press the sides of them and the latches will open. Now press the GPU inside and the latches will close. Make sure on the right side of your GPU, the power cable is connected. Your PSU will have the switch for it, connect it on the side and then power the GPU on the right power modulator *White teeth like plug* and it should work my friend.
    BElieve in YOUrself.