My Acer one 10 (D16H1) stack at preparing automatic repair

gullever
gullever Member Posts: 7 New User
edited October 2023 in 2020 Archives
Hello sir
My Acer one 10 (D16H1) stack at preparing automatic repair, I tried many solutions but all was useless
I need your help
Thanks

Answers

  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Press and hold the power button till the machine completely shuts off. Connect the keyboard. Then turn it back on again and immediately press and hold the ALT key while tapping the F10 key. A recovery screen may appear as shown below. Follow directions to refresh the system. Jack E/NJ

    https://www.youtube.com/watch?v=cpzLJRAZldA

    Jack E/NJ

  • gullever
    gullever Member Posts: 7 New User
    JackE said:
    Press and hold the power button till the machine completely shuts off. Connect the keyboard. Then turn it back on again and immediately press and hold the ALT key while tapping the F10 key. A recovery screen may appear as shown below. Follow directions to refresh the system. Jack E/NJ

    https://www.youtube.com/watch?v=cpzLJRAZldA

    I tried this one it didn't work
    I'm looking forward into setup a fresh Windows copy, I have a usb stick (windows 7 setup bootable on it), how can i start setup using it
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Sorry, your machine's UEFI bootstrapper does not support Win7. Jack E/NJ


    Jack E/NJ

  • gullever
    gullever Member Posts: 7 New User
    What about windows 8.1 ?
  • gullever
    gullever Member Posts: 7 New User
    my tab is Acer one 10 S1003
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Win8.1 would be a good choice but may have a some driver issues. You also could try installing one of the latest Linux GUIs that have the look, feel & function of Win7. Jack E/NJ

    Jack E/NJ

  • gullever
    gullever Member Posts: 7 New User
    No problem, But 
    Is there any things to take care of during making windows 8.1 setup bootable in the USB stick using rufus? 
    How can I start setup?
    How can I avoid driver those driver issues?
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    The Win8.1 installation iso must be GPT-partition FAT-32 with Rufus. The UEFI bootstrap Boot tab should have USB boot enabled and optionally placed first in the boot order since your system's eMMC won't boot right now. Can't determine at this point what driver issues you will have. If you're lucky, none.

    There is a potential problem with Win8.1 unless you have a licensed installation version. This is because your S1003 has a Win10 OEM license tied to its mainboard ID. This Win10 OEM license only applies to the ACER version of Win10 installation media and Microsoft's version of Win10. It doesn't apply to Win8.1.

    Jack E/NJ 

    Jack E/NJ

  • gullever
    gullever Member Posts: 7 New User
    I went to a maintenance center for solving this problem, they told me it's needs something they call "recovery media", so they told me that I have to go to Acer service center in Cairo but it's so far from my town, more than 700 kilometers from here.
    Is there any solution for this problem? please
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Where & from whom did you purchase this machine? Jack E/NJ

    Jack E/NJ

  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    Who in Aswan? Jack E/NJ

    Jack E/NJ

  • gullever
    gullever Member Posts: 7 New User
    I bought it from My Town Aswan, from a normal store.

  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    If "My Tow Aswan" or your  maintenance center is a certified by ACER, they may be able to order the installation media for your machine's serial number id (SNID) from the ACER service center in Cairo if you can't order it directly. Jack E/NJ

    Jack E/NJ

  • mdflores0925
    mdflores0925 Member Posts: 1 New User
    Had the same prob.. Did Alt+F10 and went to Repair.. Took a long time like 20 or so minutes to Repair then went to a Black screen again.. Rebooted it using power button and luckily can sign in now ^^
  • atiquerazvi
    atiquerazvi Member Posts: 1 New User
    Hello, My acer one 10 keyboard stand clip broken. from where i can buy new keyboard D16H1?
    D16H1 i am from Mumbai, India. please help me in finding above mentioned keyboard.
    Thanks
  • JackE
    JackE ACE Posts: 44,868 Trailblazer
    atiquerazvi Go to this link to contact the Mumbai ACER service center for this replacement. https://www.acer.com/ac/en/IN/content/contacts


    Jack E/NJ


    Jack E/NJ

  • Yakup
    Yakup Member Posts: 19

    Tinkerer

    I found the solution please activate BIOS Fast Boot 💖💖💖
  • Jibin
    Jibin Member Posts: 1 New User
    Hello !
    My acer Model No.D16H1's stand clip is broken. I am from Cochin and I have already contacted to your authorized service centre in Kadavantra. Their services are not good. I requested many times but they are negligent to get it repair. So I request you to help me to get in this matter