[Spin1-SP111-32N-P317] Cannot start the Bootable USB or DVD (32bit)

chizanu
chizanu Member Posts: 8 New User
edited March 2023 in 2017 Archives
I have tried to start boot-up the bootable DVD or USB that created with 32bit efi boot file.
It seems like is not support x86 efi. So, Please help.

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    it depends if the SP111 supports or not x86 EFI boot.
    if you are sure that your USB media is correctly done, probably you can only install x64 OS.
    I'm not an Acer employee.
  • chizanu
    chizanu Member Posts: 8 New User
    IronFly said:
    it depends if the SP111 supports or not x86 EFI boot.
    if you are sure that your USB media is correctly done, probably you can only install x64 OS.
    Thanks IronFly,

    Sure!!!, my USB and DVD Bootable media are working very well on the other laptops (and also PC) but nothing happen on this.
    I don't understand why ACER blocking this. (The BIOS cannot change "Boot Mode" to "Legacy" as well, only stick on "UEFI")
    I bought this because it very compact, lightweight and great looking than another models. 
    But, I think it does NOT MAKE SENSE and NOT GOOD IDEA to block it like this.
    Could another solution to solve it by now on? Please help.
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    No other ways to solve it apart trying a virtual machine.

    Can i ask you why you need an x86 enviroment?
    I'm not an Acer employee.
  • chizanu
    chizanu Member Posts: 8 New User
    IronFly said:
    No other ways to solve it apart trying a virtual machine.

    Can i ask you why you need an x86 enviroment?
    Yes, I have to boot-up by DLCBoot (or HerenBoot) that made by 32bit EFI (not sure able to made by 64bit or not) to launch some DOS application such as Backup/Restore, Fix Disk or etc. 
    I mean, most of those application (legacy) cannot operate completely on Windows 10x64 but it smoothly when using DOS.
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    i think Hiren's boot CD is at a dead end lately, since it's been a while since the last update ans syslinux is not a trustable EFI platform on the Hiren's boot CD.
    this just to boot from it, other software will not work too.

    so, in my opinion, no real solution.
    I'm not an Acer employee.
  • chizanu
    chizanu Member Posts: 8 New User
    IronFly said:
    i think Hiren's boot CD is at a dead end lately, since it's been a while since the last update ans syslinux is not a trustable EFI platform on the Hiren's boot CD.
    this just to boot from it, other software will not work too.

    so, in my opinion, no real solution.

    Finally, I have got the answer from Acer Engineer (Thailand) it is NOT SUPPORT for every 32bit's bootable media for this model.
    So, I don't know why is it so bad on this one. T_T

    I bough it and cant serve my need as should be. T_T
    is it possible to wait for Acer update the new BIOS version to support this matter? 
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    i don't think so, to be honest.
    I'm not an Acer employee.
  • chizanu
    chizanu Member Posts: 8 New User
    Very BAD!!! and USELESS model that I ever used.
  • JackE
    JackE ACE Posts: 45,082 Trailblazer
    As IronFly suggested, you can still run a virtual machine to serve your needs. For example, I use VMWare's Player to also run Win98SE, WinXP, and SuSE Linux all on the same host machine so I can still use older software, commands & devices when needed. Today's host machines like your Spin are so fast that it's hard to tell they're not running natively. Plus they can all communicate with each other through the network. Jack E/NJ     

    Jack E/NJ

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    VMware player is a good suggestion, i used it so many times!

    Easy to setup even if you are a beginner.
    I'm not an Acer employee.
  • chizanu
    chizanu Member Posts: 8 New User
    I really appreciates and understood both of your advises but the reason why I need to do is BOOT-UP by USB (or legacy mode) or DVD 32 bit operating system to use like XP, Win7x86 or Windows PE (such XP, Win7x86) to execute specific application that only support on them.

    I have tried many time to execute it on Windows VPC, Hyper-V, VMware and also VirtualBox but there are nothing operate completely as running on XP, Win7x86 or WIndowsPE (XP, Win7x86). I have no idea to fix it.

    So anyway, I very tied to explain my need to the ACER (Thailand) and regret they cannot help.

    My clients love this model because of it looking good, touchable, 360 degree and cheaper (I thing there is no other brand can provide such this with cheap price) BUT only does not support they application that running on 32 bit OS. I don't know why ACER's left some feature instead of leave it as the others (e.g., Legacy USB mode, Function key behavior or Hotkey switching between FN or Holding FN before press F1...F12).

    However, thanks you guys for respond.