Replacing HDD with SSD, bootable Windows installer not showing up - Nitro Spin 5 NP515-51

Nathanking90
Nathanking90 Member Posts: 2 New User
edited March 2023 in 2017 Archives
This is the "Newegg Exclusive" version with a quad core i7 and 1TB HDD. I attempted to replace the HDD with a 500GB Samsung 850 EVO, but when I restart the computer and choose the boot menu, my bootable W10 install USB isn't showing up. Do I need to install Windows on to this drive in another computer before I can use it?

Best Answer

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    1) download a windows 10 iso using Microsof tool:
    select the proper windows 10 version (the same installed on your laptop) and choose to save it as iso file when prompted
    2) download Rufus:
    plug your USB flash drive, run Rufus then:
    select ISO image from the dropdown menu near "Create a bootable disk"
    click on the little icon on the right and browse to the windows 10 downloaded iso file
    as  Partitions scheme select "GPT partition scheme for UEFI"
    as File system select "FAT32"
    click on Start
    wait until it finish, then uplug your USB flash drive
    3) backup all your personal data
    4) Reboot to BIOS, pressing F2 at boot, then press F9 to load default and F10 to save and exit
    5) plug your USB flash drive and at boot press F12 (if F12 doesn't work, see if it auto-recognise the USB flash drive or press F2 to enter BIOS and enable F12 boot menu under BOOT tab), choose the USB flash drive as bootable device
    I'm not an Acer employee.

Answers