Got an Acer Predator G3-605, upgrading power supply to 750w, need right convertor cable

Zack_112
Zack_112 Member Posts: 5

Tinkerer

edited March 2023 in 2017 Archives
Hi, im currently upgrading my power supply from 500w to 750w as my graphic card (GTX 1080) is underpowered.

Need to know if this cable is the correct one for converting the 24 pin to 12 pin to fit the acer mother board.

https://www.moddiy.com/products/Acer-PSU-Main-Power-24%2dPin-to-12%2dPin-Adapter-Cable-(30cm).html

Thanks!,

Zack

Best Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,471 Trailblazer
    Answer ✓
    Hi,
    Sorry, I am not familiar with the kind of upgrade you are doing, so you have to wait for someone else to chime in.
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Answer ✓
    That should be the right cable.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,471 Trailblazer
    Answer ✓
    Hi,
    Sorry, I am not familiar with the kind of upgrade you are doing, so you have to wait for someone else to chime in.
  • ven98
    ven98 ACE Posts: 4,073 Pathfinder
    Answer ✓
    That should be the right cable.
    Always post the following characterisitcs of the device:
    -Model number
    -Part number(not required, but helpful)
    -CPU
    -GPU
    -Operating system

    Helios 300 and Nitro 5 users DO NOT update the BIOS to version 1.22 if you don't want the keyboard's backlight to turn off after 30 seconds even when the device is plugged in.


    Hit 'Like' if you find the answer helpful!   
    Click on 'Yes' if the comment answers your question!

  • Zack_112
    Zack_112 Member Posts: 5

    Tinkerer

    @ven98
    Thank you!