G9-793-70DL Raid 0 Question about hard drive config

jjjooonnn
jjjooonnn Member Posts: 6 New User
edited March 2023 in 2017 Archives
I'm looking to buy this laptop but I'm unsure of the hard drive configurations/Raid 0 issue.
If you can't turn off Raid 0, how does BIOS configure different drives after replacing the 2-128gb SSD's?
For instance: I want to use an M.2 NVMe drive and the 1 TB HDD, but if I ever wanted to add another M.2 ssd what would happen in the BIOS?
Also, are the 2-128gb SSD's using SATA or M.2?

Best Answer

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    no, AHCI is not available on your laptop, SSD/HDD will be controlled by RAID controller.
    if you just reformat your 2 128GB SSD on RAID, you wil not loose the RAID0; if you change the 2-128GB SSDs with other 2 SSD you will loose the RAID0 and you need to recreate it.

    Solid state drive 0 
    Storage 1: M.2 2280 SATA Gen3x2 or PCIe x4 Gen3 for SSD 
    Storage 2: Optional : M.2 2280 *1 (SATA Express) for SSD 
    Storage 3: HDD : 9.5 / 7.2 / 7mm co-lay SATA3
    I'm not an Acer employee.

Answers

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    if you don't create any array using the Intel RST tool, each disk will be used as single disk.
    I'm not an Acer employee.
  • jjjooonnn
    jjjooonnn Member Posts: 6 New User
    By default the 2-128gb SSD's are Raid 0, if so if I reformat them they'll run AHCI mode?
    I'm trying to figure out what the deal is since you can't change the BIOS...
    I'm not seeing anything on number of SATA 3 ports or M.2 ports in the manual, can someone help me out here?
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    no, AHCI is not available on your laptop, SSD/HDD will be controlled by RAID controller.
    if you just reformat your 2 128GB SSD on RAID, you wil not loose the RAID0; if you change the 2-128GB SSDs with other 2 SSD you will loose the RAID0 and you need to recreate it.

    Solid state drive 0 
    Storage 1: M.2 2280 SATA Gen3x2 or PCIe x4 Gen3 for SSD 
    Storage 2: Optional : M.2 2280 *1 (SATA Express) for SSD 
    Storage 3: HDD : 9.5 / 7.2 / 7mm co-lay SATA3
    I'm not an Acer employee.