bios flashing failed windows 7 x64,

Ahasan
Ahasan Member Posts: 4 New User
edited March 2023 in 2017 Archives
Hi
I am from Bangladesh, my laptop model number Acer Aspire 4741g, recently i want to update bois using windwos x64, but it was shown faild to update bios (......... something), than i mistakenly shutdown my laptop, after 1hr i want to start it again but it only shown black screen, and restarting laptop after 2sec-5sec repentantly....

than
when i press fn+ese +power key it only blinking LED and hearing fan rotating sound
but keep black screen reaming i do it 10times and more but black screen (no led + no object/ completely screen has no power) still remain.. than i use vga to monitor connection it shown blackscreen too.

than apart my laptop and remove CMOS battery and press power key for 2min + and above
it still black screen remain...

i changed my ram my processor to but it still black screen remain..

AND without pressing fn+esc+power it goes to restart loop 2sec-5sec repentantly ...

plz suggest me any other solution

Best Answer

Answers

  • JackE
    JackE ACE Posts: 45,080 Trailblazer
    Answer ✓
    What problem did you think the BIOS update would solve? Jack E/NJ

    Jack E/NJ

  • Ahasan
    Ahasan Member Posts: 4 New User
    i only thought that it maybe optimums my graphics comfortably... plz suggest any solution
  • Ahasan
    Ahasan Member Posts: 4 New User
    hlw #Jack E/NJ
  • JackE
    JackE ACE Posts: 45,080 Trailblazer

    >>>i changed my ram my processor to but it still black screen remain.. >>>

    First, put the old RAM back in. Then try it again. If it still doesn't work, then don't make any other changes until getting further instructions here on another way to flash the BIOS. Jack E/NJ  

    Jack E/NJ