Acer Spin 5 SP513-51 unable to install windows

rizwannadeem
rizwannadeem Member Posts: 5 New User
edited March 2023 in 2017 Archives
Hi,

I bought this laptop for my company and we usually install windows 10 enterprise on our company laptops currently I m unable to view my bootable USB on boot menu, I have rechecked my USB it works on other laptops but not working in this Acer spin 5. I made my USB as UEFI, now help me to fix this.
I've also tried to clear TCM from bios but still not my bootable USB on it.

Best Answer

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    had you use Rufus to create the bootable USB flash drive?
    plug your USB flash drive, run Rufus then:
    select ISO image from the dropdown menu near "Create a bootable disk"
    click on the little icon on the right and browse to the windows 10 downloaded iso file
    as  Partitions scheme select "GPT partition scheme for UEFI"
    as File system select "FAT32"
    click on Start

    if your laptop has both USB2.0 and 3.0, please use 2.0 ports
    I'm not an Acer employee.

Answers

  • brummyfan2
    brummyfan2 ACE Posts: 28,470 Trailblazer
    edited October 2017
    Hi,
    Have you tried in Legacy mode in BIOS? If not, switch to Legacy mode in BIOS and see whether it helps.
  • rizwannadeem
    rizwannadeem Member Posts: 5 New User
    how do I get into the Legacy mode in BIOS? Please help
  • rizwannadeem
    rizwannadeem Member Posts: 5 New User
    Any help please
  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer
    Answer ✓
    had you use Rufus to create the bootable USB flash drive?
    plug your USB flash drive, run Rufus then:
    select ISO image from the dropdown menu near "Create a bootable disk"
    click on the little icon on the right and browse to the windows 10 downloaded iso file
    as  Partitions scheme select "GPT partition scheme for UEFI"
    as File system select "FAT32"
    click on Start

    if your laptop has both USB2.0 and 3.0, please use 2.0 ports
    I'm not an Acer employee.
  • rizwannadeem
    rizwannadeem Member Posts: 5 New User
    Thanks, A lot your help fixed my issue, I was also using Rufus but I select NTFS partition and after changing into FAT32 then installation starts.
    Thanks again.