aspire one D250

shupike
shupike Member Posts: 2 New User
edited March 2023 in 2017 Archives

Hello everyone! Please help with my problem - I see message "MBR Error 2" every time when notebook is turned on. But WinXP is normally loading after that. So problem is: some delay (approx 10 sec) with error message. How can I fix it? Any advices? Thank you.

Answers

  • JackE
    JackE ACE Posts: 44,904 Trailblazer

    Assuming you don't have the original WinXP installation media, turn off all power to the machine. Then turn the power back on and immediately press the ALT key, while tapping F10. Does a recovery console appear? If yes, what options are available? Jack E/NJ

    Jack E/NJ

  • shupike
    shupike Member Posts: 2 New User

    You know, I'm already made system restore (reset to factory settings) by pressing Right Alt+F10. But the problem is still the same. Hard drive is solid state - may be this is the reason?

  • JackE
    JackE ACE Posts: 44,904 Trailblazer

    Yes, the SSD explains why the ALT+F10 re-set wouldn't work unless you had cloned the original HDD and its hidden ACER eRecovery partition onto the SSD. How did you install WinXP on the SSD? Jack E/NJ  

    Jack E/NJ