Battery not working(VN7-592G)

AriaA97
AriaA97 Member Posts: 6

Tinkerer

edited March 2023 in 2017 Archives
Today I reapplied thermal paste on my 592G but now battery isn't working.
Windows does detect battery and remaining percentage (45%) but it doesn't charge. And also it doesn't turn on without adaptor.

I already tried tesetting battery but it didn't fix.

Any suggestions?

Best Answer

  • Trikein
    Trikein Member Posts: 25

    Tinkerer

    Answer ✓

    Check that all the screws are tight that hold on the keyboard. As per this forum post:

     

    "there is a "battery cut-off" microswitch on the motherboard, that is disengaged when the top (keyboard) cover is firmly attached. If the two centre (underside) screws are not tight enough, or the top cover is not properly engaged, the switch will act a bit goofy and likely cause the issue you are having"

Answers

  • Trikein
    Trikein Member Posts: 25

    Tinkerer

    Answer ✓

    Check that all the screws are tight that hold on the keyboard. As per this forum post:

     

    "there is a "battery cut-off" microswitch on the motherboard, that is disengaged when the top (keyboard) cover is firmly attached. If the two centre (underside) screws are not tight enough, or the top cover is not properly engaged, the switch will act a bit goofy and likely cause the issue you are having"

  • AriaA97
    AriaA97 Member Posts: 6

    Tinkerer

    Worked! Many thanks.