Iconia A1-810 only Vibrates when I turn it on.

rvkorven
rvkorven Member Posts: 2 New User
edited March 2023 in 2017 Archives

My Iconia A1-810 is not good. When I turn on the tablet only he start to vibrate. Nothing appears on the screen. I try to reset the tablet but without results. I disconnect the pcs with the charging connector and put him on again. It seems it is not the connector and also not the battery because the motor inside the tablet turns around and that is the vibration what we feel.

Nothing appears on the screen. Does someone now what I can do more. Thanks a lot.

Answers

  • billsey
    billsey ACE Posts: 34,912 Trailblazer

    First verify that you have fully turned it off. Press and hold the power button for 30 seconds or so, then release and wait for a few more seconds and try to turn it on normally. Sometimes an Android app will get hung in sleep mode and not allow a shutdown or startup.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • rvkorven
    rvkorven Member Posts: 2 New User

    Hello,

    I did what you wrote but when I hold the power button the tablet each 2 seconds he vibrate. There appair nothing on the screen.

    I try also to discconect the battery from the mainboard for some minutes and try again what you said. It's the same. The tablet don't show anything on the screen but he only vibrates each 2-3 seconds.

    Sreen broken maybe???  Strange

  • billsey
    billsey ACE Posts: 34,912 Trailblazer

    Strange indeed. I have no further suggestions, it may be a bad screen or a problem deeper into the tablet. Can you see the filesystem by connecting it to a PC via USB? If it were running I'd think it would show up.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.