128 gb drive

kfaber36
kfaber36 Member Posts: 2 New User

I swapped my 128gb hard drive in S7 for a 500gb msata.  my 128 drive was split into a pair of 64's.  I'm trying to use a usb msata drive enclosure for the old drive but when I hook it up only one of the 64's shows up.  I checked disk manager nothing there either.  Any help would be appreciated!

Answers

  • philetus
    philetus ACE Posts: 4,759 Pathfinder

    Open a Command Prompt as Administrator, Type diskpart. Type list disk, Drive 0 will be the laptop HDD. If the USB is the only other drive it will be Drive 1. Type select disk 1. Type list partition.

    That should show you if there are two partitions on the drive.

     

  • IronFly
    IronFly ACE Posts: 18,413 Trailblazer

    the 128GB msata is a 2 64GB module with a single controller that hands it as 2 drives; probably only BIOS that it's enabled to use RAID configuration can handle it.

     

    Honestly i never seen one used on an external USB enclosure.

    I'm not an Acer employee.
  • kfaber36
    kfaber36 Member Posts: 2 New User

    Thanks,  I thought that might be the case.  I tried command prompt and no luck.  The only thing that seems to read both drives is installing it back into the computer.  Not a huge deal but realy annoying.