![DSC_0071[1].jpg](http://acer.i.lithium.com/t5/image/serverpage/image-id/5436iBF929CB4ED12F352/image-size/original?v=mpbl-1&px=-1 "DSC_0071[1].jpg")
Left side screen hinge after reassembly !! Pls help!
melvin1999
Member Posts: 20 New User
Answers
-
Hello,
I guess you have need the part number of this part for Aspire V3-571G:
33.M03N2.007 - BRACKET LCD RIGHT LEFT
0 -
It's not broken , it looks exactly like the right side hinge. When i open the laptop that side lifts up.When i close it,i have to close the left hinge with my hand
here is a pic of how it looks like when the left side hinge is closed with my hand
.
here is pic of how the laptop looks when it closed without me doing anything.
What do you think about this????
0 -
Hello Melvin,
Hmmm... The screw is passed through the hole!
Is it the original screw?
The hinge is it hard?
The only solution is to change the lower cover.
60.M03N2.003 - COVER LOWER W/CAP/MYLAR
0 -
Yes the screw is original
What do you mean by the hinge is hard or not? I can open and close it freely, the only thing is when i open it the left side comes up !!
0 -
Well the hinge is ok. On your pictures, the screw head move when you close or open the screen. It means the hole is broken.
0 -
I have attached the link to the video of the hinge when i open and close the laptop. Please watch it sir.
http://www.mediafire.com/download/262avardxaf1v0k/Laptop+Hinge.mp4
What do you think abt it? Could it also be that the screw is loose ?
0 -
Hello,
I only watch the videos on YouTube. Could you post it on YouTube?
Wow. Sir... No Sir with me!
0 -
https://www.youtube.com/watch?v=AHsOdphWKPA&feature=youtu.be
Here it is, also, do you know how to remove stripped screws?
0 -
Wow! Do you have the same problem on the right hinge?
0 -
Nope, right side is Perfect. i am only having probems with left side
0 -
Both screws are screwed to the upper cover (grey frame + keyboard). Normally you unscrew them (Torx screw driver) and you retrieve them.
Another solution, you can perhaps stick the broken parts with a gel glue (cyanoacrylate - super glue).
See this picture: 60.M03N2.003 - COVER LOWER W/CAP/MYLAR (inside).
Otherwise, you'll have to change this part.
Do you have the manual?
0 -
I think you live in belgium. I found the part in my country. It costs 39+10€ (available). No customs fees in EEC countries.
0 -
iT IS not related to the case,BTW i live in kerala,india. I don't think it is related to the case at all. The case is perfect,No cracks
0 -
Hello,
India, I made a big mistake. Sorry.
You did not make a mistake screw? because there are 1 screw M2.5x4.0 and 17 screw M2.5x8.0.
I have checked again and these ones are screwed in the upper cover (aluminium panel).
Do you have the manual of your laptop?
0 -
-
also,my laptop's service manual:
http://www.mediafire.com/download/oz1o8b78hkwjkhf/Service_Guide_Acer_Aspire_V3-571_571G.pdf
0 -
-
i have inserted the screw correctly according the holes i can see on the bottom
0 -
About your picture, yes. The lengths are differents 4 and 8 mm. It's very difficult to see on the manual.
About my picture, have you checked if the mounting holes aren't unsoldered or broken?
Note:
Your reply about the manual will be removed by a moderator.(this document is reserved to Acer technicians)
0 -
BTW, you were right,the plastic screw mount that mounts the screw is broken.Can it be fixed without CHANGING THE PART???I have attached the pic of my toolbox,pls tell me with which head can i remove the sctripped screw pictured below
0
