Aspire xc600: pin-out configuration for motherboard

whompley
whompley Member Posts: 2 New User

Hey there! I'm moving my Aspire xc600 to a larger case to accomodate a new graphics card, and I'm having a bit of trouble with the front panel headers, as they seem to be non-standard. No motherboard manuals are available online, so I can't double check. The pins labelled F_PANEL are configured as follows:

 

1   X | X  2

3   X | X  4

5   X | X  6

7   X | X  8

8   X | O 10 (no pin)

11 X | X  12

13 X | X  14

Answers

  • whompley
    whompley Member Posts: 2 New User

    Okay! I figured it out by tracing the wires on the original casing, and am posting it here because this motherboard apparently doesn't exist on the internet.

     

    Acer H16H-AD Motherboard Front Panel 14-pin Pin Out Diagram:

     

    +HDD LED  1   X | X  2 +PWR LED

    -HDD LED  3   X | X  4 -PWR LED

                    5   X | X  6 PWR SW

                    7   X | X  8 PWR SW GROUND

                    8   X | O 10 (no pin)

                    11 X | X  12

                    13 X | X  14

     

    In the original case there is no reset button, so I can only presume it goes on 5 & 7, but when I did that it wouldn't turn on.

This discussion has been closed.