Watermark "Windows 8.1,SecureBoot isnt configured correctly,Build 9600" after official update

Sharanji
Sharanji ACE Posts: 4,328 Pathfinder
in 2013 Archives

hi..

 

I just updated to windows 8.1 from app store and suppose this update is the official update. But I am  getting watermark at the bottom right corner?  Post if anyone tried a corect resolution.


"Windows 8.1,SecureBoot isnt configured correctly,Build 9600". 
 
FileDownloadHandler.png

Answers

  • Sharanji
    Sharanji ACE Posts: 4,328 Pathfinder

    Model number is M5-582PT-6852.

  • shtiliyan
    shtiliyan Member Posts: 1 New User
    I have the same problem with S3- 391
  • Chas_Large
    Chas_Large Member Posts: 7 New User

    Same problem with Aspire V5-471.

     

    Cannot change any BIOS settings for secure boot as recommended in the MS article

     

    http://technet.microsoft.com/en-us/library/dn441535.aspx

     

    Stuck with a watermark I cannot remove and a BIOS I cannot change. No I never set up any BIOS passwords.

  • pauljayd
    pauljayd Member Posts: 2 New User

    Same problem with my M5-582PT-6852.

  • Hutch
    Hutch Member Posts: 3 New User

    I used the process detailed by Grombie in another forum labeled "secure boot message problem after upgrading windows to 8.1"   It worked and I know longer have the issue.

    1. start/restart your computer then press F2 to enter the bios. (your computer may have a different button to push)

    2. go to security tab and set supervisor password. (i used 1234 for simplicity)

    3.  go to boot tab and make sure secure boot is enabled. (mine was already)

    4. return to security tab and select "reset secure boot settings to factory default"

    5. F10 to exit and save

    This process worked for me and I tried quite a few other solutions,  Big thanks to Grombie

     

  • smr40
    smr40 Member Posts: 2 New User

    i would like to add i did this recomendation it didnt work the first time so i did one thing different. before i reset to factory settings like it says. i togggled the secureboot from enabled to disabled and back to enabled. because mine was enabled all along. and like i said the first time it didnt work. it now seems to have fixed the issue. thanks for the help, oh by the way one thing i havnt seenis with this not configured, does it make the computer more vulnerable ?

     

  • smr40
    smr40 Member Posts: 2 New User

    I had same problem I followed instructions here and seems to work. But, now some of my tool bar add ons don't work. They say incompatible. i tried to download them again and get an error saying the os system isn't right. It was yahoo tool bar and the Norton tool bar. Any fix to this. I followed the windows 8.1 update from windows on initial install.

This discussion has been closed.

Categories