when I enter the serial number of ANV15-51-53S1, the nitro sense application does not appear.

Options
mehmetarsn
mehmetarsn Member Posts: 1 Newbie
edited July 5 in Nitro Gaming

ORIGINAL:

kolay gelsin nitro cihazımın seri numarasını girdiğimde nitro sense uygulaması çıkmıyor bunu nereden bulacağım sitede neden sürücü kaldırıldı bilgisayaramın modeli nitro ANV15-51-53S1

TRANSLATED:

Good luck, when I enter the serial number of my nitro device, the nitro sense application does not appear. Where can I find it? Why was the driver removed from the site? My computer model is nitro ANV15-51-53S1

[Translated using Google]

Answers

  • Puraw
    Puraw ACE, Member Posts: 17,665 Trailblazer
    edited 5:03AM

    Hi, it seems Acer hasn’t officially listed it for that particular submodel yet.

    If you're sure the system previously had NitroSense installed, or you saw it on similar units, you might try downloading it manually using the general NitroSense installer: https://community.acer.com/en/kb/articles/16481-how-to-download-and-install-acer-nitrosense-software
    That said, not all Nitro models officially support NitroSense, and sometimes the installer won’t run if your system ID isn't in the app’s config. If that's the case, it may simply not be supported for your device—or Acer might push an update later to re-enable it for your model.
    If NitroSense isn’t showing up or isn’t useful for your needs, there are a few solid third-party tools worth trying. FanControl by Rem0o (https://github.com/Rem0o/FanControl.Releases) is one of the best out there—open source, with a clean interface and tons of customization options for fan curves and sensor linking. Argus Monitor (https://www.argusmonitor.com/) is another great option if you want something stable and lightweight, though it’s paid after a trial. If you just need detailed monitoring, HWInfo is fantastic, and can pair with other tools for logging and alerts. For GPU-specific control, MSI Afterburner (https://www.msi.com/Landing/afterburner) works well even if your laptop isn’t MSI branded. And if look for a more traditional tool, SpeedFan (http://www.almico.com/speedfan.php) still works for some systems, though newer chipsets might not be supported.

    Merhaba, Acer'ın henüz o alt model için resmi olarak listelemediği anlaşılıyor.

    Sistemde daha önce NitroSense yüklü olduğundan eminseniz veya benzer ünitelerde gördüyseniz, genel NitroSense yükleyicisini kullanarak manuel olarak indirmeyi deneyebilirsiniz: https://community.acer.com/en/kb/articles/16481-how-to-download-and-install-acer-nitrosense-software

    Bununla birlikte, tüm Nitro modelleri NitroSense'i resmi olarak desteklemez ve bazen sistem kimliğiniz uygulamanın yapılandırmasında değilse yükleyici çalışmaz. Durum buysa, cihazınız için desteklenmiyor olabilir veya Acer daha sonra modeliniz için yeniden etkinleştirmek üzere bir güncelleme gönderebilir.

    NitroSense görünmüyorsa veya ihtiyaçlarınız için yararlı değilse, denenmeye değer birkaç sağlam üçüncü taraf aracı vardır. Rem0o'nun FanControl'ü (https://github.com/Rem0o/FanControl.Releases) piyasadaki en iyilerden biridir; açık kaynaklıdır, temiz bir arayüze ve fan eğrileri ve sensör bağlantıları için çok sayıda özelleştirme seçeneğine sahiptir. Argus Monitor (https://www.argusmonitor.com/) eğer istikrarlı ve hafif bir şey istiyorsanız bir diğer harika seçenektir, ancak deneme süresinden sonra ücretlidir. Sadece ayrıntılı izlemeye ihtiyacınız varsa, HWInfo harikadır ve günlük kaydı ve uyarılar için diğer araçlarla eşleştirilebilir. GPU'ya özgü kontrol için, MSI Afterburner (https://www.msi.com/Landing/afterburner) dizüstü bilgisayarınız MSI markalı olmasa bile iyi çalışır. Ve daha geleneksel bir araç arıyorsanız, SpeedFan (http://www.almico.com/speedfan.php) bazı sistemlerde hala çalışır, ancak daha yeni yonga setleri desteklenmeyebilir.