-
Ranking the Best Champions for Solo Runs in Nightreign
Elden Ring Nightreign launched on May 30, 2025, and was developed by FromSoftware. Built as a co-op extraction spin-off of the original Elden Ring, it condenses the series’ signature combat and exploration into fast-paced multiplayer expeditions. Even so, many players tackle Nightreign alone, mastering its eight Nightfarers under solo conditions. This article ranks those characters strictly by their solo performance, examining which classes deliver the most consistent mix of damage output, survivability and utility when you face Nightreign’s challenges on your own.
8. Recluse
The Recluse ranks last for solo play primarily because her entire design heavily favors multiplayer. Her kit centers on supportive spellcasting, lacking the durability needed to effectively solo challenging bosses. Tied for the lowest health pool among Nightfarers, the Recluse struggles to survive enemy hits without teammates absorbing aggro.
Her reliance on spells, combined with poor Strength and Dexterity scaling, limits weapon choices severely. She’s largely dependent on RNG to find useful spells, many of which have slow casting animations, making her vulnerable to attacks during crucial fights. Her signature "Cocktail Mix" mechanic becomes notably weaker solo, as many mixes either prove ineffective or have excessively long animations unsuited to tight boss windows.
Additionally, her ultimate ability, balanced around team-wide benefits, provides significantly less individual value due to its short duration. Without allies present to capitalize on shared buffs, the Recluse’s overall effectiveness sharply declines. These factors collectively make her the most challenging and inconsistent character choice for solo runs in Nightreign.
7. Revenant
The Revenant ranks seventh for solo play because she shares many of Recluse’s weaknesses, including poor health and limited weapon options. With low Strength and Dexterity scaling and only high Faith scaling, she’s largely confined to Incantations or faith-based weapons, making her overly reliant on RNG to find good equipment. Unlike Recluse, though, Revenant’s abilities offer more practical solo utility, her character skill summons allies to distract enemies, giving crucial breathing room to safely cast spells.
However, her Incantations often lack the raw power needed to efficiently defeat tougher bosses, forcing her into prolonged fights where any misstep can be fatal due to her fragile health pool. Furthermore, her ultimate and passive abilities, while helpful in dealing with crowds, aren’t strong enough to significantly overcome her inherent squishiness against tougher enemies. Revenant has better solo tools than Recluse, but she’s still very challenging compared to other Nightfarers due to heavy reliance on finding specific, powerful faith gear to remain viable in combat.
6. Raider
The Raider ranks sixth primarily due to fundamental flaws in his core design, despite having decent base stats. He features solid health and stamina, with respectable Strength scaling, theoretically setting him up to be a potent melee fighter.
However, the Raider is burdened by uniquely poor movesets specifically associated with colossal weapons, great axes, and great hammers, the weapon classes best suited to his Strength scaling. These slow and cumbersome animations significantly reduce his damage per second and make him vulnerable during combat. In fact, other characters wielding the same weapons frequently outperform the Raider simply due to their faster attack animations, making him feel redundant and frustrating to use solo.
Additionally, his passive ability merely enhances his character skill rather than providing an independent advantage, further limiting his solo viability. The charged variant of his skill requires him to sustain damage first, making it unreliable and risky in high-pressure boss encounters. To succeed consistently with the Raider in solo play, players are often forced to resort to weaker weapon types, undermining his intended playstyle. Without adjustments to his moveset and passive abilities, Raider remains overshadowed by other Nightfarers better optimized for independent play.
5. Duchess
The Duchess secures the fifth spot because, despite impressive theoretical damage potential, her inherent fragility and awkward stat distributions limit her effectiveness in solo play. While her Intelligence and Dexterity stats hint at versatility, neither is sufficiently high to yield consistently powerful builds. The Duchess possesses a relatively low Dexterity scaling (B) combined with a higher Intelligence scaling (A), effectively forcing reliance on a mix of spells and physical attacks. Unfortunately, she suffers from limited FP reserves, which quickly restrict her spellcasting capabilities in longer boss fights. Moreover, her ultimate ability grants invisibility, a trait predominantly beneficial in multiplayer environments for repositioning or reviving allies.
In solo play, this ability pales in comparison to the direct damage or survivability boosts provided by other Nightfarers' ultimates. Still, her character skill “Restage” is a powerful damage amplifier, causing increased vulnerability to enemies through additional status buildup and stance damage. Combined with her exceptional dodge mechanic, she can reliably evade incoming damage, enhancing her survivability despite lower health. Yet, these strengths are not enough to compensate entirely for her inconsistent offensive capabilities and reliance on specific gear drops, leaving her firmly in the middle tier for solo effectiveness.
4. Guardian
The Guardian occupies fourth place due to his exceptional durability and ease of survival in solo scenarios, although his overall damage output remains limited. He boasts the highest health and stamina among all Nightfarers, making him extraordinarily resilient and capable of absorbing substantial punishment. This robustness offers players increased room for error, which is invaluable for learning boss mechanics and enemy patterns during solo runs.
Furthermore, playing solo boosts the likelihood of obtaining gear tailored to his defensive strengths, such as damage-negation buffs and sturdy shields, allowing him to leverage blocking strategies effectively. However, the Guardian significantly struggles with damage, hampered by mediocre offensive scalings and a lackluster moveset, particularly with his primary weapon type, the halberd. His passive ability and ultimate skill, while useful in multiplayer scenarios for reviving teammates or crowd control, provide limited utility in solo encounters.
Additionally, the Guardian's dodge mechanic is notably weak, characterized by clunky movements and extended recovery frames. This drawback forces reliance on blocking and guard counters rather than evasion, reducing his flexibility and making certain fights particularly challenging. While reliably survivable, his lack of offensive power prevents him from achieving top-tier solo status.
3. Executor
The Executor earns third place due to outstanding offensive capabilities, making him one of the strongest damage dealers in solo play. His standout feature is exceptional scaling, with double S-tier growth in Dexterity and Arcane. This greatly boosts both raw damage output and status effect buildup. Such scaling makes him incredibly flexible and powerful, especially when wielding high-tier dexterity or arcane weapons like Rivers of Blood or Eleonora’s Poleblade.
His starting katana moveset is swift and fluid, perfectly suited for applying various status effects. Combined with smart relic choices, Executor can reliably maintain constant pressure on bosses.
However, his abilities are somewhat inconsistent in solo scenarios. His ultimate is arguably the best for raw damage and provides excellent survivability by granting an instant panic-heal. In contrast, his passive skill and defensive “Deflect” mechanic offer limited value, since they work best against smaller, easily staggered enemies rather than bosses.
As a result, Executor depends heavily on precise dodging and positioning in more demanding encounters. Despite these minor shortcomings, his unmatched damage potential, versatility with dexterity and arcane builds, and exceptional burst capability firmly establish him among the strongest solo Nightfarers.
2. Wylder
Wylder claims the second spot because he represents an ideal combination of power, consistency, and survivability, suitable for players of all skill levels. His balanced stat distribution, A scaling in Strength and B in Dexterity, allows him to wield almost any weapon type efficiently, resulting in consistently strong damage output throughout a run.
He also enjoys excellent health and stamina, ranking just below the Guardian, which ensures he can tank hits while maintaining offensive momentum. Unlike the Guardian, Wylder’s abilities significantly complement his solo playstyle.
His passive skill grants an invaluable second chance by providing a free revive mechanic once per grace rest. This massively enhances his ability to recover from mistakes during challenging encounters. His ultimate is extraordinarily powerful, capable of stance-breaking virtually any enemy with a single blow while dealing enormous burst damage.
Moreover, his character skill, a grappling hook, greatly improves traversal speed and exploration efficiency, indirectly boosting rune acquisition and leveling pace. The only reason he does not top this list is that his kit, while powerful, falls just short of the outright broken, game-changing nature of the Iron Eye.
1. Iron Eye
Iron Eye secures the top spot thanks to overwhelming advantages in range, safety, damage amplification, and resource generation, making solo play much easier and more efficient. Although Iron Eye has relatively low health compared to other Nightfarers, his ranged prowess more than compensates by minimizing direct enemy interaction.
Specializing in bow combat, he fires rapidly without worrying about ammunition, enabling continuous, low-risk pressure on enemies. This lets him clear foes from afar quickly and accumulate runes faster than melee-focused classes. His “Marking” skill debuffs enemies, increasing their vulnerability and triggering massive burst damage upon breaking.
Beyond pure damage, Iron Eye passively boosts item drop rates, improving loot quality throughout runs and enhancing gear consistency. His ultimate delivers devastating area-of-effect damage from range, capable of clearing entire rooms or melting bosses, especially when combined with Marking. While characters like Wylder or Executor excel in certain roles, Iron Eye’s robust, consistent, and overwhelmingly powerful kit cements him as the best solo character in Elden Ring Nightreign.
Built for solo legends
Iron Eye's relentless range, Executor’s raw power, Wylder’s balanced toolkit, Elden Ring Nightreign rewards precision, adaptability, and build mastery. Every solo run is a test of timing, positioning, and gear. To succeed, you need hardware that keeps up.
If you're ready to take that challenge seriously, your gear matters just as much as your strategy. Acer’s Predator and Nitro gaming rigs are engineered for players who demand peak performance. Predator and Nitro systems ensure fluid framerates, fast load times, and immersive visuals. Choose Predator for high-end power and tournament-grade performance. Choose Nitro for reliable strength and smart value wrapped in a sleek, portable design.
No matter how you fight, make sure your setup is as ready as you are. Victory favors the well-equipped.
Recommended Products
Orion 7000
Buy Now
Triton 14
Buy Now
-
Best Racing Games to Play in 2025 on PC
Racing games continue to deliver speed, realism, and excitement, and many of the best titles from recent years remain as engaging as ever in 2025. These standout PC racing games range from detailed driving simulations to action-packed arcade experiences, including motorsport management, motocross, and open-world adventures. Here are the top racing games you should be playing on your PC in 2025.
1. BeamNG.drive
Originally launched in 2013, BeamNG.drive continues to stand out with unmatched vehicle physics and an active, dedicated community. Starting as a physics sandbox, it evolved into a robust racing title, rivaling even major releases in popularity.
A vibrant modding community continually enriches BeamNG with fresh content, while frequent developer updates expand maps, add scenarios, and fine-tune gameplay. The physics engine remains a highlight, offering realistic damage and handling simulation that few other games can match.
VR support has returned in an improved experimental state, bringing a new layer of immersion to the driving experience. Graphics performance has also seen major gains thanks to Vulkan API integration, allowing for smoother visuals and better hardware efficiency.
The new career mode adds structure and long-term goals to the sandbox, with players starting from simple cars and progressing by completing missions and earning upgrades. Though still in Early Access, this mode already adds considerable value and is updated regularly. For players looking for a constantly evolving, physics-driven racing experience, BeamNG.drive remains one of the most rewarding options on PC.
2. Forza Horizon 5
Forza Horizon 5 sets a new standard for open-world racing games. Built around a sprawling and diverse map of Mexico, it delivers one of the most visually impressive and content-rich racing experiences on PC. The terrain ranges from desert highways and lush jungles to mountain switchbacks and historic towns, making every drive feel unique.
The garage features over 500 cars, many with new customization options and noticeable improvements to audio and handling. Visual upgrades, especially to lighting, dust, and particle effects, enhance the sense of immersion across both performance and quality modes.
Horizon 5 also expands its creative tools. Players can design custom races and events nearly indistinguishable from developer-made content, encouraging a steady stream of user-generated challenges. Career mode has been restructured with an accolade system and dynamic "Expeditions" that showcase the game’s most cinematic moments.
Multiplayer now supports more casual competition, removing penalties for bad online behavior. Cooperative Horizon Arcade events and other subtle refinements round out a package that’s as massive as it is polished. With consistent updates and community activity, Forza Horizon 5 remains a top-tier choice for open-world racing.
3. F1 25
F1 25, developed by Codemasters and published by EA Sports, introduces the biggest overhaul to its flagship My Team mode since its debut. Instead of playing as an owner/driver, you now act as a team principal managing two drivers across a full F1 season. This shift adds more depth to team management, including budgeting, facility upgrades, and production timelines for car parts.
The new management system gives players more strategic control, like choosing which driver receives upgrades first, and assigning perks that affect R&D and negotiations. Although some UI bugs and timing inconsistencies still need ironing out, the added complexity creates a more satisfying long-term career mode.
The game’s visual presentation is the most polished in the series to date, with upgraded lighting, trackside detail, and subtle authenticity improvements across circuits like Vegas and Suzuka. AI behavior has also been improved, delivering tenacious and believable racing dynamics that respect track position and challenge players fairly.
Braking Point 3 returns as a story mode continuation, bringing back characters from previous entries and expanding the narrative. While some cutscenes feel dated due to real-world developments, the cinematic quality and on-track challenges remain engaging. With a refined career structure and standout visuals, F1 25 is a strong entry in the sim-racing calendar for 2025.
4. Assetto Corsa Evo
Assetto Corsa Evo, now in Early Access, already delivers top-tier driving feel. The game features five real-world tracks, Mount Panorama, Brands Hatch, Imola, Laguna Seca, and Suzuka, plus 20 diverse cars. Handling is tight and responsive, with excellent grip and braking feedback, even in wet conditions.
While AI still needs polish and offline-only restrictions limit some modes, the driving experience is strong. The game’s massive planned open-world map, centered around the Nürburgring and set to span 1,600 km², hints at enormous potential.
Despite technical hiccups and limited features, Assetto Corsa Evo shows clear promise. It’s not yet a must-play, but for fans of serious sim racing, it’s a compelling work in progress worth keeping an eye on.
5. Trackmania
Trackmania is a high-speed time-trial racer with a razor-sharp focus on track mastery. Originally launched in 2020 as a remake of TrackMania Nations, it features over 45 official tracks and an addictive gameplay loop that encourages players to shave milliseconds off their best runs. The racing is fast, floaty, and exhilarating-especially when you finally hit a perfect lap on the edge of control.
Custom tracks remain a major highlight. Thanks to a block-based editor, the community continues to produce wild, inventive creations-from stunt courses and obstacle runs to recreations of classic tracks. However, much of this creativity is locked behind a subscription system. Free players can race official tracks and use a basic editor, but access to most community content requires a paid yearly pass.
Despite some clunky UI and a steep learning curve, Trackmania remains a unique and rewarding experience. It may not rival the visuals of modern sims, but its gameplay is timeless-and still unmatched for pure, fast-paced racing precision.
6. Need for Speed: Heat
Need for Speed: Heat, released in 2019 by Ghost Games, marks a return to form for the franchise. Set in the Miami-inspired Palm City, the game blends legal day races for money with illicit nighttime races that earn reputation. This dual system adds a compelling loop of risk and reward that helps progress both your garage and your career.
Customization is a major highlight. Players can personalize avatars, apply deep visual modifications to cars, and upgrade parts with intuitive performance metrics. You can turn an unassuming vehicle like a Volkswagen Beetle into a supercar killer, making the tuning process both accessible and satisfying.
The game offers a wide roster of vehicles, from classic muscle cars to hypercars. Performance rating gates progression but rarely feels punishing unless diving into off-road racing, where setup balance can feel inconsistent. Heat also features a forgiving damage model, though police chases at night turn up the intensity.
While performance issues may appear on older systems, modern setups handle the Frostbite engine well. With its vibrant world, strong customization, and street racing roots, Need for Speed: Heat is one of the most entertaining arcade racers still worth playing in 2025.
7. Tokyo Xtreme Racer
Tokyo Xtreme Racer returns in 2025 as an unapologetically retro racing experience from Genki, now in Early Access. This reboot stays true to its PS2-era roots with single-player highway duels across Tokyo’s Shuto Expressway. Players cruise the expressway, flash headlights to initiate battles, and deplete opponents’ “Spirit Points” through distance, collisions, or wall contact-like a racing-fighting hybrid.
With over 200 named opponents, the game mixes predictable duels with rare boss battles and team-based challenges. Some rivals only appear under specific conditions, adding a layer of exploration. The car list features nearly 50 Japanese models from Subaru, Nissan, Mazda, Toyota, and others-though Honda is notably absent. Handling is slick and arcade-like, best played with bonnet cam. While graphics and customization are modest, the focused gameplay loop is highly engaging.
There are gripes: sound design lacks punch, some menus are clunky, and progression can stall if you can’t unlock specific upgrades. Still, the loop of night driving, rival hunting, and garage upgrading is as satisfying as ever. It’s a love letter to early 2000s racing games-free of microtransactions and live-service clutter-and it’s already shaping up to be one of the year’s most nostalgic and addictive racers.
8. Wreckfest 2
Wreckfest 2 hits Early Access as a high-impact follow-up to Bugbear’s acclaimed demolition racer. Right from the start, it delivers chaotic, metal-crunching action with satisfying driving physics and visual polish. The new Scrapyard map steals the show with destructible environments stacked high with crushed cars and debris, all interactable in real time. Racing through this space feels dynamic, especially with improved sound design and detailed, location-based damage modeling.
Only a handful of cars and tracks are available so far, making the current build feel more like a demo than a complete experience. Still, what's here plays exceptionally well. The AI is aggressive and unpredictable, adding to the tension whether you're in a circuit race or a full-on derby.
Crashes to desktop are a problem some players may encounter, though performance is otherwise solid on modern systems. The lack of upgrade or tuning options limits depth for now, but based on the original Wreckfest, more content is expected later in development.
With its satisfying blend of arcade chaos and surprising nuance, Wreckfest 2 already shows promise. It’s not yet a must-play, but fans of vehicular mayhem will find plenty to like, provided they're comfortable jumping in early.
Recommended Products
Nitro 60
Buy Now
Nitro 14
Buy Now
-
Membrane vs Mechanical Keyboard
When choosing a keyboard, understanding the difference between mechanical and membrane keyboards is essential. This article clarifies these differences, outlining their pros and cons, and helps you decide which keyboard suits your needs. We'll also introduce a great series of mechanical keyboard options from Acer.
What is a membrane keyboard?
A membrane keyboard uses a flexible, pressure-sensitive layer beneath each key. When you press a key, it pushes down on a rubber dome or membrane sheet, closing an electrical circuit that registers the keystroke. This simple design makes membrane keyboards lightweight, affordable, and quiet. Often bundled with budget desktops or laptops, they rely on a flat, continuous membrane layer rather than individual moving parts for each key.
What is a mechanical keyboard?
Mechanical keyboards contain individual switches beneath each keycap. Each switch consists of a spring and metal contact that physically clicks together when pressed, sending a signal to your computer. These switches typically come in several distinct colors, each indicating a specific feel and sound:
* Blue (clicky, tactile)
* Red (smooth, linear)
* Brown (balanced, tactile but quieter)
* Black (linear, heavier press)
* Green (clicky, heavier press)
* Clear (tactile, heavier than Brown)
Because each key sits on its own mechanism, mechanical keyboards offer superior durability, responsiveness, and customization compared to membrane keyboards.
Build differences between membrane and mechanical keyboards
Membrane keyboards are constructed using a flexible rubber or silicone membrane that spans the entire keyboard layout. Each keypress pushes a dome-shaped section of the membrane downward, making contact with a circuit layer to register input. This method of construction results in a soft, cushioned key feel with minimal noise. Membrane keyboards are generally rated for approximately five million keystrokes, making them suitable for light to moderate use. Their sealed design limits dust and debris from entering the interior, which reduces maintenance requirements and improves resistance to minor spills.
Mechanical keyboards use individual mechanical switches beneath each keycap. These switches typically include a spring-loaded mechanism and a metal contact point that physically completes a circuit when actuated. This allows for distinct tactile feedback, faster response times, and a variety of switch types to accommodate different typing preferences. Mechanical switches are commonly rated between 50 and 100 million keystrokes, making them significantly more durable than membrane designs. However, the exposed switch housings are more susceptible to dust and debris, requiring more frequent cleaning. Mechanical keyboards also allow for extensive customization, including the replacement of keycaps, switches, and in some models, hot-swappable components.
Pros and cons of membrane vs mechanical keyboards
Membrane Keyboards
Pros
* Quiet operation: Key presses are softer and produce minimal noise, making membrane keyboards suitable for shared or noise-sensitive environments.
* Affordable pricing: Typically less expensive than mechanical models, membrane keyboards are a cost-effective choice for general use or large-scale deployments.
* Basic spill and dust resistance: The sealed membrane layer offers moderate protection against liquid spills and debris, which can help reduce the risk of short circuits or damage.
* Lightweight design: Membrane keyboards are usually thinner and lighter, making them easier to transport and more suitable for compact desk setups.
* Lower power consumption: Some membrane models consume less energy, which can extend battery life in wireless configurations.
Cons
* Limited tactile feedback: The rubber dome mechanism produces a soft, indistinct key feel that may reduce typing accuracy or responsiveness for some users.
* Shorter lifespan: Most membrane keyboards are rated for around 5 to 10 million keystrokes, significantly less than their mechanical counterparts.
* Minimal customization: Keycaps and switches are not easily replaceable, and the internal construction limits personalization or repair options.
* Inconsistent key response over time: Rubber domes degrade with use, which can lead to uneven key resistance and a less consistent typing experience.
Mechanical Keyboards
Pros
* Responsive tactile feedback: Mechanical switches offer clear actuation points and satisfying key travel, enhancing typing precision and comfort.
* Long-lasting construction: Many mechanical keyboards are rated for 50 to 100 million keystrokes, making them ideal for heavy typists or gamers.
* Extensive customization: Users can choose from a variety of switch types (linear, tactile, clicky), replace keycaps, and adjust features like RGB lighting and actuation force.
* Improved input accuracy: Most mechanical models support full N-key rollover and anti-ghosting, allowing simultaneous keystrokes to register correctly.
* Wide switch variety: Switch options such as Cherry MX, Gateron, and others allow users to tailor the typing experience to their preferences in sound, feel, and resistance.
Cons
* Higher cost: Mechanical keyboards are generally more expensive due to their complex switch design and higher-grade materials.
* Louder key presses: Depending on the switch type, especially clicky variants, mechanical keyboards can be noisy and distracting in quiet settings.
* Bulkier build: Mechanical keyboards tend to be heavier and larger, which may not suit users seeking portability or minimal desk setups.
* Ongoing maintenance: Regular cleaning may be required, and users interested in switch tuning or lubrication should expect additional upkeep.
Are mechanical keyboards better?
Mechanical keyboards are widely considered better because of their superior durability, enhanced typing accuracy, and satisfying tactile feedback. They improve typing speed, reduce fatigue during long sessions, and offer extensive customization options. However, whether mechanical keyboards are better for you depends on your priorities: comfort, cost, noise, and usage habits.
Which keyboard type suits you best?
* For Gaming: Mechanical keyboards are superior, offering faster response, durability, and customization, especially with red switches.
* For Typing and Productivity: Mechanical keyboards (especially blue or brown switches) provide excellent feedback, reducing fatigue and increasing accuracy.
* For Budget or Quiet Environments: Membrane keyboards are practical, quiet, and affordable.
Acer Atheon: A good mechanical keyboard recommendation
Looking for a reliable and premium mechanical keyboard? The Acer Atheon series is a superb choice. Designed with precision and comfort, the Acer Atheon is built for gamers and professionals alike.
Why Choose Acer Atheon?
* Durable Build: Robust, long-lasting construction ideal for heavy users.
* Customizable RGB Lighting: Personalize your keyboard to match your setup or mood.
* High-quality Mechanical Switches: Offers precise, satisfying keystrokes for improved productivity and gaming performance.
The Acer Atheon series exemplifies why mechanical keyboards are so highly regarded, combining aesthetic design, reliability, and exceptional typing comfort. Upgrade your typing experience today, buy now!
Conclusion
Knowing the difference between mechanical and membrane keyboards helps you choose a keyboard suited to your needs. While membrane keyboards offer affordability and quiet operation, mechanical keyboards provide exceptional durability, tactile satisfaction, and customization. Ultimately, mechanical keyboards like the Acer Atheon are a smart investment for those seeking improved productivity and a superior typing experience.
Recommended Products
Aethon 300
Buy Now
Aethon 330
Buy Now
Aethon 700
Buy Now
-
GPU Buying Guide: Key Graphics Card Specs You Need to Know
If you're building or upgrading a PC, picking the right graphics card can be one of the toughest, and most important, decisions. With constant releases, evolving GPU specs, and a wide range of performance tiers, it’s easy to get overwhelmed. This guide explains exactly what to look for when buying a GPU, from technical features to real-world benchmarks, so you can find the best graphics card for your needs.
What is a GPU?
A GPU, or Graphics Processing Unit, is a specialized chip designed to render visuals, accelerate computations, and handle high-performance graphics workloads. Whether you're gaming, editing 4K video, using AI tools, or just multitasking across multiple monitors, your GPU is what makes it all feel fast and fluid.
Unlike CPUs, which handle general-purpose tasks, GPUs are optimized for parallel processing, ideal for lighting effects, rendering geometry, and running neural networks. Today’s GPUs do much more than just draw pixels. With technologies like ray tracing, DLSS 4, and AI-assisted rendering, GPUs are now central to how modern PCs operate, both in games and creative apps.
1. GPU Model and Architecture
One of the first things to evaluate when choosing a graphics card is the GPU model and its underlying architecture. This determines not only raw performance, but also efficiency, feature support, and long-term compatibility with the latest software and games.
NVIDIA GeForce RTX 50 Series (Blackwell Architecture)
NVIDIA’s newest lineup is the RTX 50 Series, based on the Blackwell architecture. These GPUs include fourth-generation Ray Tracing Cores, fifth-generation Tensor Cores, and support for DLSS 4 with Multi-Frame Generation. They’re optimized for high-end ray tracing, AI-assisted rendering, and 4K gaming. Current models include:
* RTX 5090 – 32GB GDDR7, ultra-high-end flagship
* RTX 5080 – 16GB GDDR7, high-end 4K and creative performance
* RTX 5070 Ti – 16GB GDDR7, strong upper-midrange option
* RTX 5070 – 12GB GDDR7, ideal for 1440p gaming
* RTX 5060 Ti – 12GB GDDR7, budget-friendly 1080p+ performance
* RTX 5060 – 8GB GDDR7, entry-level gaming and AI acceleration
All cards support PCIe 5.0, DisplayPort 2.1, and include full support for DLSS 4 and neural rendering enhancements.
AMD Radeon RX 9000 Series (RDNA 4 Architecture)
AMD’s Radeon RX 9000 Series, built on the RDNA 4 architecture, focuses on delivering excellent mainstream performance with improved ray tracing and AI capabilities. These GPUs support FidelityFX Super Resolution 4 (FSR 4), AMD’s first machine-learning–accelerated upscaling technology, and come equipped with second-gen AI accelerators. Key models include:
* RX 9070 XT – 16GB GDDR6, 64 Compute Units, 128 AI Accelerators
* RX 9070 – 16GB GDDR6, 56 Compute Units, 112 AI Accelerators
* RX 9060 XT (16GB) – 16GB GDDR6, 32 Compute Units
* RX 9060 XT (8GB) – 8GB GDDR6, 32 Compute Units
The RX 9000 Series targets 1080p and 1440p gamers with competitive price-to-performance ratios, while also enabling AI-driven features and efficient power consumption.
If you're looking for the most powerful features available today, NVIDIA’s Blackwell cards lead in AI acceleration and ray tracing. If your focus is value, the RX 9000 Series offers excellent performance for the price, especially in the midrange segment.
2. VRAM (Video Memory)
VRAM, or Video RAM, is dedicated memory built into the graphics card that stores assets like textures, frame buffers, and rendering data. It plays a key role in determining how well your GPU handles modern games, high resolutions, and demanding creative applications.
For 1080p gaming, 8GB of VRAM is generally sufficient. However, as you move into 1440p or 4K gaming, or if you're working with video editing, 3D modeling, or AI tools, you’ll benefit from 12GB to 16GB or more. Many modern AAA games already exceed 10GB of VRAM usage at 4K with ultra settings, especially when ray tracing is enabled.
Current top-end cards reflect this shift. The NVIDIA RTX 5090 includes a massive 32GB of GDDR7, offering plenty of headroom for the most demanding use cases. Even lower-tier RTX 50 Series cards, like the 5070 and 5060 Ti, come with 12GB, ensuring smoother gameplay at higher resolutions.
On the AMD side, the RX 9070 XT and 9070 each come with 16GB of GDDR6, which is more than enough for 1440p gaming and even entry-level 4K performance. The RX 9060 XT is available in both 16GB and 8GB variants, offering flexibility for budget-conscious users.
It’s important to note that more VRAM doesn’t automatically mean better performance. It’s about balance. A high-end GPU with 16–32GB of VRAM is ideal for professionals and enthusiasts, while an 8–12GB card will satisfy most gamers without overpaying for unused capacity.
3. Clock Speed and Core Counts
Clock speed and core count are two of the most commonly misunderstood GPU specifications. While they both affect performance, their impact depends on how they interact with the overall architecture and design of the GPU.
Clock speed, measured in MHz or GHz, shows how fast the GPU cores operate. A higher clock speed allows more instructions to be processed each second. However, a faster clock does not always mean better real-world performance. This is especially true when comparing cards from different generations or brands. For example, an AMD card may have a higher frequency than a similar NVIDIA model but still perform worse due to architectural differences.
Core count refers to how many processing units are inside the GPU. NVIDIA uses CUDA cores, while AMD uses Compute Units and Stream Processors. More cores typically allow for better multitasking and higher parallel processing power. However, total performance also depends on how the architecture uses those cores.
Modern GPUs include specialized cores for ray tracing and AI tasks. NVIDIA cards have Tensor Cores and Ray Tracing Cores, while AMD cards use AI Accelerators and Ray Accelerators. These extra units are essential for features like DLSS and FSR.
In short, clock speed and core count should be viewed as part of a larger picture that includes architecture, memory, and thermal performance.
4. Ray Tracing and AI Features
Ray tracing is a rendering method that creates more realistic lighting and reflections by simulating how light behaves in the real world. It adds significant depth and realism to modern games but is also very demanding on hardware.
NVIDIA continues to lead in this area. The RTX 50 Series features fourth-generation Ray Tracing Cores and supports DLSS 4, which uses AI to upscale resolution and even generate new frames. DLSS 4 improves frame rates while maintaining high image quality through advanced machine learning.
AMD’s RDNA 4 architecture improves on previous generations with enhanced Ray Accelerators and introduces FidelityFX Super Resolution 4. FSR 4 is the first AMD upscaling technology to use dedicated AI hardware, making it a more direct competitor to DLSS.
Both DLSS and FSR aim to boost performance without sacrificing image quality. DLSS tends to deliver slightly better results, especially at 4K, due to its more mature ecosystem. However, FSR 4 is a strong and improving alternative, especially for those using AMD cards.
If you care about visual fidelity and smooth performance in demanding titles, support for ray tracing and AI features is worth prioritizing.
5. Bandwidth and Bus Interface (PCIe 4.0 vs PCIe 5.0)
Bandwidth refers to how much data a GPU can move between its memory and the rest of your system. Two key elements affect this: the speed and type of memory, and the bus interface used to connect the GPU to your motherboard.
Most modern graphics cards use either PCIe 4.0 or PCIe 5.0. PCIe 5.0 offers twice the bandwidth of PCIe 4.0. However, for gaming, this difference is not usually noticeable unless you are working with extremely high resolutions, large datasets, or multiple high-bandwidth components.
The RTX 50 Series and RX 9000 Series both support PCIe 5.0. This ensures better performance headroom for future workloads and improves compatibility with next-generation motherboards.
Memory type and bus width also matter. NVIDIA’s RTX 5090 uses GDDR7 with a wide bus, providing excellent memory throughput for 4K and beyond. AMD’s RX 9070 XT uses GDDR6 with a 256-bit bus, which is well suited for 1440p and moderate 4K gaming.
While PCIe version and memory bandwidth are not the most important specs for every buyer, they help ensure your GPU runs efficiently in both current and future use cases.
6. Power Requirements and Thermal Design Power (TDP)
Power and heat are two important considerations when buying a GPU. Thermal Design Power, or TDP, gives an estimate of how much heat a card generates and how much power it draws during typical workloads.
High-end cards like the RTX 5090 have a TDP of over 450 watts. These cards usually require at least an 850 or 1000 watt power supply, depending on the rest of your system. Midrange cards such as the RTX 5070 or RX 9060 XT are more efficient, typically drawing between 160 and 250 watts. These can operate safely with a 650 to 750 watt power supply.
You should also check power connector types. Many RTX 50 Series GPUs use the new 16-pin 12VHPWR connector, which requires compatible power supplies or included adapters. AMD’s RX 9000 Series generally sticks with the standard 8-pin connectors, making them easier to integrate into existing builds.
A high TDP means you will also need good cooling. Most GPUs come with dual or triple-fan coolers, and some include vapor chambers for better heat management. Be sure your PC case has adequate airflow and enough space to house the card.
Before buying a new GPU, verify that your power supply and case can support its power and cooling requirements.
7. Ports and Display Support
Before buying a GPU, it's important to check the types and number of display outputs it provides. Most modern graphics cards include a combination of HDMI and DisplayPort, but not all support the latest standards.
For high refresh rate monitors or resolutions above 4K, look for GPUs with HDMI 2.1 or DisplayPort 2.1. These standards support higher bandwidth, enabling smoother performance at 4K 144Hz or 8K resolution. NVIDIA's RTX 50 Series typically includes both DisplayPort 2.1 and HDMI 2.1. AMD’s RX 9000 Series supports DisplayPort 2.1a and HDMI 2.1 across most models as well.
If you're using multiple monitors, confirm that the GPU has enough outputs and that your desired resolutions and refresh rates are supported. Gamers often prefer DisplayPort because of its support for higher refresh rates and lower input latency.
8. Cooling and Fans
Thermal management is critical for maintaining performance and stability over time. A GPU that runs too hot can throttle its own performance or wear down faster due to sustained heat.
Most GPUs use either dual-fan or triple-fan cooling systems. Higher-end models like the RTX 5090 may include vapor chamber cooling and larger heatsinks to handle the increased thermal output. Some custom cards even offer liquid cooling options, which are quieter and more effective but come at a higher cost.
AMD and NVIDIA both offer reference coolers, but many consumers prefer third-party cards with enhanced cooling designs. Always check the physical size of the card and make sure your case has enough room and airflow to accommodate it.
9. Benchmarks
Benchmarks are one of the most reliable ways to judge real-world GPU performance. These tests evaluate how well a card handles actual games and tasks, providing data on frame rates, power draw, and temperatures.
Focus on benchmarks that match your intended use. For example, a card that performs well in 1080p might not handle 1440p or 4K as efficiently. Review sites such as TechPowerUp, Tom’s Hardware, and Hardware Unboxed provide extensive data and side-by-side comparisons to help you make informed choices.
Rather than relying on specs alone, always check how a GPU performs in your preferred settings and titles.
10. Value for Your Money
The best GPU is not always the most expensive. It’s the one that fits your specific needs and budget while delivering reliable performance.
If you're gaming at 1080p or 1440p, you may not need a top-tier card like the RTX 5090. Midrange options like the RTX 5070 Ti or RX 9070 XT offer excellent performance for a much lower price. NVIDIA tends to lead in premium features like ray tracing and AI upscaling, while AMD often offers better price-to-performance in the mainstream segment.
Always consider long-term support, driver stability, and feature updates in addition to raw specs. Balancing performance with price will help you get the most out of your investment.
Recommended Products
Nitro Radeon AMD RX7800 XT
Buy Now
BiFrost AMD Radeon RX7600
Buy Now
Nitro Intel® Arc™ B580
Buy Now
-
Why is My Computer Mouse Not Working? How to Fix a Broken Mouse
Like all hardware, a computer mouse can stop working at any time. A broken mouse can occur for various reasons, but it should be fixable as long as it hasn’t been splattered with coffee or rolled over with an office chair. This article gives handy tips on fixing a computer mouse not working properly, and when it might be time for a replacement.
How to troubleshoot a broken mouse
A faulty mouse can be frustrating, especially if it is required to avoid repetitive strain injuries or ensure comfort while working. But all may not be lost. If there are no signs of obvious damage, interference, or debris, try out some of these suggestions before running out and buying a new mouse.
1. Unplug and replug
A classic trick for faulty electronics, but sometimes, simple advice is the most effective. If a computer mouse suddenly stops working, start by unplugging and plugging it back in again. If that is unsuccessful, try a different USB port, as the underlying issue may be with the port and not the mouse.
2. Replace the battery (if wireless)
If the mouse is wireless, try swapping out the batteries for new ones and double-check that they are properly installed. This is particularly important if you haven't replaced the batteries since new. If the mouse is chargeable, plug it into the charging port before trying to reconnect it, as computer mice can sometimes stop working suddenly when battery levels are low.
3. Check Microsoft settings
If the buttons are not working as intended, you may have accidentally inverted your mouse clicks. This means that the scrolling direction or movement of the cursor has been changed or reversed. See the following instructions to rectify an inverted mouse via Microsoft settings:
* Open Microsoft settings
* Click Accessibility
* Select Mouse pointer and touch
* Choose Inverted pointer style.
4. Try updating drivers
If these steps have been unsuccessful so far, it’s now time to check the device drivers for updates. Check the manufacturer’s website and download them accordingly if available
5. Potential technical issues
The steps above should be enough to fix the most common mouse issues. If that doesn't work, a faulty mouse could be due to a mechanical or wiring issue, which are more technical to fix. In this case, it may be necessary to send the mouse to a professional for repairs.
Should I buy a new mouse?
A replacement mouse may be the most cost-effective option if it stops working because of mechanical or wiring issues. This is also the case if the cursor moves erratically when the mouse is not in use or if there is visible external damage. Here are some options from the Acer store.
1. For gaming
The Acer Predator Cestus range of mice has something for all gaming needs. For example, the Predator Cestus 350 is a wireless gaming mouse that ensures accuracy and comfort without annoying cables. It has eight programmable buttons and 16.8M RGB backlighting for effortless scrolling.
The Nitro Gaming Mouse III NMW200 offers a 6D Optical sensor with 6 game-optimizing DPI shifts (800-7200) and seven colorful lights for a more immersive gaming experience. Moreover, the AOPEN Gaming Mouse includes a Pixart 3325 IR Sensor and a 20 million click lifetime, making it a trusty gaming companion.
2. For everyday use
The Acer Vero AMR020 is a sleek wireless mouse made from 30% post-consumer recycled (PCR) plastic and works comfortably for right- and left-handed users. It is responsive and offers 1200 dpi resolution, making it ideal for everyday use.
With 1600 dpi resolution and comfortable shape, the Acer AMR100 wireless mouse lets users click and scroll with confidence. Its plug-and-play setup is easy to navigate and compatible with Chromebooks, PCs, and Macs.
Conclusion
A faulty mouse can be annoying, especially if you rely on it for wrist support or daily work. First, check the mouse for any visible damage or debris between the mouse and the work surface or desk. Then try the suggestions above or consider purchasing a new one if there is a mechanical fault.
Recommended Products
Predator Cestus 350
Buy Now
Vero AMR020
Buy Now
-
Game-changing AI Gaming Laptops from Acer
In gaming, performance is everything. From split second decisions to the responsiveness of your keyboard and mouse, every detail contributes to victory or defeat! Imagine if you could harness the power of AI and unleash it in your gaming exploits. Well, the good news is that you can, with an AI gaming laptop. In case you missed it, these are the new generation of laptops currently taking the gaming world by storm. If you’re new to AI laptops, or already searching for the best AI laptop, then you’re in the right place. Read on to discover the defining features of AI gaming laptops, then we’ll introduce four top notch upcoming Acer models.
What is an AI gaming laptop?
This is a pretty new breed of computer, so let’s briefly cover the essential features of AI gaming laptops before we check out the goods from Acer. AI gaming laptops are devices that combine high-end gaming specs with AI integrated features. Expect the latest CPUs, GPUs, as well as dedicated NPUs (neural processing units), and AI accelerators for real-time optimization. What this means is increased performance, responsiveness, and efficiency when it really matters.
Onboard AI processing uses machine learning to optimize graphics settings, fan speed, and power usage to massively enhance your gaming experience. As you’ll see from the PCs below, an AI gaming laptop is also the perfect choice for content creators, power users and streamers. Everyday productivity, multitasking, and even video calls benefit from AI integration. Finally, AI gaming laptops are ready to handle next-gen AI games and software, adding the undeniable benefit of futureproofing.
1. Predator Triton 14 AI
First in our lineup of upcoming portable AI infused gaming beasts is the Predator Triton 14 AI. The perfect solution for creative pros and gamers on the go, this 14-inch creativity and gaming powerhouse delivers AI-powered play and productivity. A Copilot+ PC that comes with an NVIDIA GeForce RTX 5070 GPU, the Triton 14 AI delivers a stunning 798 AI TOPS. AI to the core, this is a laptop that will help you smash the competition with (up to) Intel Core Ultra 9 CPU (48 AI TOPS).
The smallest of the laptops featured today, the Predator Triton 14 AI is equipped with a 14.5" OLED display with a WQXGA+ resolution of 2880 x 1800. Hardware-wise, the Triton 14 AI also packs (up to) 32 GB DDR5 RAM and (up to) 2 TB SSD. Slim and lightweight, the Predator Triton 14 AI can be effortlessly carried wherever you choose to go. Whatever you need to do, this laptop will help you do better.
2. Helios 18 AI
If you’re looking to go big, and possibly not go home, then the Predator Helios 18 AI is ready to join you on the journey. Aptly named after the Greek god of the sun, this 18-inch juggernaut is powered by an (up to) Intel Core Ultra 9 processor and a beastly NVIDIA® GeForce RTX™ 4090 GPU, for ultra-responsive gameplay and multitasking. For gaming, content creation, and streaming, the Helios 18 is the magic carpet ride you’ve been searching for.
Moving on to the massive 18-inch mini-LED display, you’ll be stunned by the peak brightness of 1000 nits and (up to) a 120Hz refresh rate, delivering silky smooth visuals and immersive play. Inside, you’ll discover (up to) 32 GB DDR5 RAM and (up to) 1 TB PCIe Gen 4 SSD storage, enough to help you plough through games as well as work. You might think that such a gargantuan device would struggle to stay cool? Not the Helios 18 AI with its 6th Gen AeroBlade 3D Fan technology that adapts at high speed to increase air flow. If you’re an elite gamer, creator or streamer, try out the Helios 18 AI and see if you can handle it.
3. Nitro V 16S AI AMD
Our next AI gaming powerhouse, the Nitro V 16S AI AMD delivers a serious dose of gaming power, performance, and mobility. Crafted for gamers and creators on the move, the Nitro V 16S AI AMD features (up to) an AMD Ryzen AI 9 365 processor (50 TOPS) and NVIDIA GeForce RTX 5070 GPU with 798 AI TOPS. Taking on device AI to the next level, the Nitro V 16S AI AMD amplifies with the power of DLSS 4, Reflex 2, and full ray tracing to keep you ahead of the game, whether you’re gaming, creating, streaming, or editing.
For full visual immersion, the16-inch WQXGA (2560 x 1600) display features a 180Hz refresh rate, 400-nit brightness, and 100% sRGB coverage. This device also excels at keeping cool on every occasion: dual fans and a quad-intake and exhaust cooling system handle the heat. The Nitro V 16S AI AMD packs the power, but remains slim (chassis under 19.9 mm thick). The 4-zone RGB keyboard, USB 4, Wi-Fi 6E, and AI-driven NitroSense controls all make the Nitro V 16S AI the wise choice for next-gen gaming and productivity in all places.
4. Helios Neo 16 AI
Last but not least in our adventure among the upcoming AI gaming laptops from Acer, meet the Helios Neo 16 AI. If you’re looking for a mid-size Intel powered AI gaming laptop, the Predator Helios Neo 16 AI cannot be beaten. Powered by (up to) an Intel Core Ultra 9 275HX processor with 24 cores and a max turbo frequency of 5.4GHz, the Helios Neo 16 AI can handle all of your gaming and multitasking requirements. Moving on to the GPU, (up to) an NVIDIA GeForce RTX 5070 Ti GPU with 140W MGP and 992 AI TOPS takes on-the-go visuals to a whole new level. This GPU incorporates features including DLSS 4, Reflex 2, Advanced Optimus, and full ray tracing powered by NVIDIA Blackwell architecture.
Blink and you’ll miss the beauty: visuals are delivered on (up to) a 16:10 OLED WQXGA (2560x1600) display with up to 240Hz refresh rate, 1ms response time, DCI-P3 100% color gamut, and NVIDIA G-SYNC. This laptop has AI integrated into every pore, Intel Application Optimization and the dedicated NPU enhance performance, reduce latency, and streamline background tasks, while Acer PurifiedView 2.0, PurifiedVoice 2.0, and ProCam support enhanced streaming and communication. For AI enhanced top-tier performance, seek out the Helios Neo 16 AI.
Get future-ready
We hope that you’ve enjoyed discovering the best upcoming AI gaming laptops from Acer. As you can see, these laptops balance state-of-the-art hardware and intelligent AI integration, for the ultimate gaming and creation experience. Whether you’re looking for an ultra-portable lightweight device like the Predator Triton 14 AI, or a juggernaut such as the Helios 18 AI, we’re sure there’s an Acer device to meet your needs. Check out these upcoming AI gaming laptops today, and future-proof your gaming and productivity!
Recommended Products
Orion 7000 (4080 GPU)
Buy Now
Orion 7000 (5080 GPU)
Buy Now
-
How to Remap Keyboard in Windows 11 Using Microsoft PowerToys
Want to remap a keyboard key in Windows 11? Whether you're fixing a broken button, tailoring a layout for gaming, or repurposing underused keys, learning how to reprogram your keyboard can boost comfort and productivity. This article explains why remapping your Windows keyboard is useful, how to do it using Microsoft tools, and how to reset everything to default settings.
Why remap your keyboard?
Most people stick with the default QWERTY layout, but there's no rule that says you have to. Here are a few common reasons why you might want to remap a keyboard key:
* Typing in other languages: Remap your keys to mimic AZERTY, Dvorak, or Colemak layouts for language-specific typing or ergonomic comfort.
* Gaming customization: Competitive and casual PC gamers often reprogram keys to create faster, more accessible input combinations.
* Productivity shortcuts: Assign frequently used functions (like Copy or Paste) to unused keys.
* Replacing broken keys: If a key stops working, you can assign its function to another key.
* Repurposing underused keys: Keys like Scroll Lock or Insert can be remapped to more useful commands.
Understanding how to remap a Windows keyboard gives you full control over your setup, whether you're optimizing for work or play.
How to remap keyboard keys in Windows 11
The best way to remap a keyboard key in Windows 11 is to use Microsoft PowerToys, a free utility developed by Microsoft.
Step-by-step: Using PowerToys Keyboard Manager
* Download PowerToys from GitHub or the Microsoft Store.
* Install and launch PowerToys.
* In the left sidebar, select Keyboard Manager.
* Toggle "Enable Keyboard Manager" to ON.
* Click "Remap a key" to open the key mapping tool.
* Click "+ Add" to create a new key mapping.
* Under "Key", press or select the key you want to change.
* Under "Mapped To", select the new function or key output.
* Click OK, then Apply to save your changes.
Example: You can remap Caps Lock to Ctrl for easier shortcut use.
PowerToys must stay running in the background for your remapped keys to work.
Alternative layouts and tools
If you're interested in switching away from QWERTY, try these popular layouts:
* AZERTY: Common in France; switches Q/W and M among others.
* Dvorak: Minimizes finger movement for ergonomic typing.
* Colemak: Blends Dvorak efficiency with QWERTY familiarity.
Other tools for key remapping include:
* SharpKeys: A simple interface that writes directly to the Windows Registry.
* AutoHotkey: Ideal for scripting complex macros and shortcut sequences.
* Microsoft Keyboard Layout Creator: Lets you build entire custom layouts (Windows 10 only).
How to reset keyboard mappings to default
If you want to undo your remaps, here’s how to reset to the original configuration.
In PowerToys:
* Open Keyboard Manager.
* In the Remap Keys panel, click the trash can icon next to each custom mapping.
* Or click Clear All to remove all remaps.
* Click Apply to confirm changes.
Uninstalling PowerToys will also revert your keyboard to its default behavior after a restart.
Frequently Asked Questions
Q: Can I remap keyboard shortcuts as well?
Yes. PowerToys also includes a separate section for remapping multi-key shortcuts (e.g., Ctrl+Alt+S).
Q: Does remapping affect all apps and games?
Yes. Once remapped, the key functions are system-wide, including in games, web browsers, and office software.
Q: Can I remap special function keys (like Volume or Brightness)?
Not all special keys are supported by PowerToys. Compatibility depends on your keyboard model and the support for its drivers.
Final thoughts
Learning how to remap keyboard keys in PowerToys Windows 11 opens up a new layer of customization for your PC. Whether you're looking to speed up your workflow, improve typing ergonomics, or just work around a hardware issue, remapping your keys is fast, reversible, and entirely free using Microsoft PowerToys. Try it out and take full control of your typing experience.
Recommended Products
Aspire Go 14
Buy Now
Swift X 14
Buy Now
Aspire Vero 16
Buy Now
-
6 Signs It’s Time to Upgrade Your PC (Before Windows 10 Support Ends)
There comes a time when every dog has its day. There also comes a time to replace your computer. Ask five people how often you should replace your computer, and you’re likely to get five different answers. Well today we’re cutting through the confusion around when to buy a new laptop. We’ll explain what Windows 10 EOS (End of Service) means and help you answer the burning question: when should I upgrade my computer? Read on to discover the truth about the upcoming Windows 10 EOS, as well as some warning signs that it is time to upgrade your computer.
What is an EOS?
If you missed our article covering the end of life for Windows 10, here’s a quick overview: After October 14, 2025, Microsoft will no longer provide official updates, security patches, and security support for the outdated version of the OS, namely Windows 10. So, from October 14, PCs still running Windows 10 will be subject to a range of risks, including security vulnerabilities, software compatibility issues, and loss of tech support. Knock on effects of these issues may include decreased productivity and performance, and compliance and regulatory risk for businesses, leading to potential legal consequences and fines. We’re not here for a Windows 10 vs Windows 11 discussion, but the takeaway is: upgrade or extend your security updates before the Windows 10 EOS.
Should I upgrade my PC?
Time is seldom kind to athletes, rock stars, or technology. But how do you know when it's time to upgrade your computer? Crank up your old computer and take note: there are several things to look out for that may mean it's time to bid farewell to your current device.
1. Boot-up and performance are painfully slow. No one likes waiting around for an old PC to warm up. If your computer takes longer than it once did to start up and launch apps, then this is a sign that your hardware is struggling to keep up with the demands of modern computing. If you’re using an older hard drive with a mechanical HDD, long startup times might make you consider upgrading to a device with SSD storage. An outdated CPU and limited RAM may lead to lags in daily computing, and your computer may struggle with basic multitasking and running mode programs. Sluggish computing is no fun, so you may want to upgrade for increased productivity and better user experience.
2. You're constantly running into compatibility issues. Technology is a swiftly evolving beast. Unsurprisingly, new games and software are designed to run on devices with high RAM specs and the latest GPUs and CPUs. System limitations mean that older PCs simply can’t support many new programs like productivity tools and creative software, leading to compatibility issues. This can lead to error after error, crashes, and the inability to install essential updates. Depending on what you use your computer for, if you can no longer install or run the programs you require, do yourself a favor and update before it's too late!
3. Missing key modern features. Regardless of whether you’re a tech enthusiast interested in following all the latest PC features, or someone who simply uses your computer as a tool to get work done, there are certain features that a PC in 2025 will struggle without. Lack of USB-C means slower data transfer and limited peripheral compatibility. Fast charging and Thunderbolt support won’t be possible, and you’ll also be unable to connect to new accessories, or use the latest networking tech. Without Wi-Fi 5 or Bluetooth 6, you’ll be dealing with weaker, slower wireless connections. An upgrade provides access to a world of speedy, versatile connections.
4. Overheating, loud noises, or poor battery life. If your PC is starting to sound like an old diesel engine, then it may be time to cool off with a new device. Fans constantly fanning can indicate thermal throttling, meaning that your CPUs clock speed is automatically reduced to stop heat damage. If your PC gets hot during basic tasks, then performance and lifespan are both suffering. And it’s not just heat you need to worry about; battery life matters too. Battery life on even the newest devices slowly decreases over time, but an old battery that can hardly run unplugged means it's time for a new laptop.
5. Hardware security vulnerabilities. If you’re unfamiliar with TPM 2.0 and Secure Boot, please check that your device is protected as it may be vulnerable to attack! Trusted Platform Module (TPM) is a hardware-based security feature that enhances your computer’s security, while Secure Boot prevents malicious software from loading when your PC starts up. Older devices may not receive firmware or critical driver updates, while BIOS updates and patching for known issues may also be neglected. These vulnerabilities may compromise your data, leading to all sorts of problems. Upgrade your PC and say hello to modern hardware that massively improves threat prevention through encryption and authentication.
6. Your PC can’t run Windows 11. That means once Windows 10 support ends, you’ll be stuck with an outdated system that no longer receives essential security updates or performance fixes. Windows 11 requires relatively recent CPUs, TPM 2.0, and Secure Boot security features. Without Windows 11, you’ll be unable to receive updates, performance optimizations, and of course, security improvements.
Time to upgrade?
We hope that today’s discussion has helped you decide if it's time to upgrade your PC. Whatever you use your computer for, whether it's gaming, work, studies, or entertainment, we strongly recommend you equip yourself with a PC that runs Windows 11 before the Windows 10 EOS in October. Oftentimes the signs we’ve covered start to appear all at once: a loud fan announces an overheating device that’s slow to startup and struggles with simple software.
When your beloved PC reaches that point in time, do yourself a favor and upgrade. You deserve it!
Head to the Acer Store page to check out all the latest, greatest PCs and find one that suits your individual requirements and budget.
Recommended Products
Aspire 14 AI
Buy Now
Aspire C24
Buy Now
-
Most Popular Extraction Shooters to Play in 2025
An extraction shooter is a subgenre of shooter games where the primary objective is to enter a map, gather loot, and safely extract—all while surviving against both AI enemies and other players (PvEvP). What makes it unique is the risk-reward loop: if you die, you lose all your carried gear, including what you brought in. But if you make it out alive, you keep everything you looted for future missions. This system adds a layer of tension and long-term progression that differs from traditional multiplayer shooters or battle royales.
Key features:
* Persistent inventory across matches (stash/gear system)
* PvEvP (AI enemies + real players)
* High-stakes permadeath (lose what you carry in)
Strategic extraction points (you choose when and where to leave)
* No shrinking safe zone like in battle royales
* Typically mission-based rather than kill-based win conditions
Think of it like a looter-shooter meets survival, where the win condition isn't who survives last, but what you take home.
If you're into high-stakes gameplay where survival and smart decision-making matter, 2025 has a strong lineup of extraction shooters worth checking out. Whether you're looking for gritty realism, fantasy twists, or sci-fi settings, these are the best extraction shooter to keep on your radar in 2025.
1. Hunt: Showdown 1896
Developer: Crytek | Platform: PC, PS5, Xbox Series X/S
Hunt: Showdown 1896 is a bold overhaul of Crytek’s cult-favorite extraction shooter. Rebuilt in CryEngine 5.11, the update introduces enhanced visuals, redone audio, and improved performance, bringing 4K at 60fps to current-gen consoles. While the refresh has been welcomed by many, the new UI and console aim assist features have divided the community. Crytek has acknowledged the feedback and is working to refine the experience.
At its core, Hunt remains one of the most distinctive PvPvE shooters available. Set in a grim 19th-century Southern gothic landscape, players track monstrous bounty targets, banish them, and extract with the reward while other teams do the same. The new Mammon’s Gulch map adds a large, mining-town environment with verticality and improved environmental design. The recently introduced Hellborn target further raises the stakes, acting as a deadly roaming boss that can disrupt encounters and force chaotic firefights between rival teams.
The game’s roguelike system still applies. When a hunter dies, players lose both their gear and progression. This creates high tension, but can be frustrating for newcomers or anyone on a losing streak. That said, the equipment economy, randomized perks, and steady unlocks provide a satisfying sense of risk and reward. The latest battle pass includes new hunters, weapons, cosmetics, and even audio logs that expand the game's narrative without locking story content behind a paywall.
Despite lingering matchmaking quirks and some growing pains with the UI, Hunt: Showdown 1896 delivers a tense and atmospheric shooter experience. With Crytek actively updating the game and more reworked maps on the way, this revamped version is one of the top extraction shooters to dive into in 2025.
2. Dark and Darker
Developer: IRONMACE | Platform: PC
Dark and Darker blends fantasy dungeon crawling with the high-stakes gameplay of a hardcore extraction shooter. Often described as Skyrim meets Escape from Tarkov, it drops players into tense PvPvE environments where adventuring parties explore hostile dungeons, collect loot, and attempt to extract before being taken out by enemies or rival players.
The game replaces modern firearms with swords, magic, and melee combat. Players can choose from a variety of distinct classes like Fighter, Cleric, Bard, or Wizard. Each class has its own abilities and gear loadouts, offering different playstyles and strategies. Combat is methodical and timing-based. Every swing, block, and spell cast has weight, and success relies more on precision and decision-making than speed or twitch reflexes.
Tension plays a central role in the experience. The dungeon environments are dark, filled with traps, environmental hazards, and AI monsters. Torchlight becomes essential for navigation. You can choose to leave early with modest loot or push deeper into the dungeon for better rewards, but doing so risks running into stronger enemies or players who are hunting the same objectives.
Boss fights, such as the Ghost King and Skeletal Warlord, serve as endgame content. The ranked High Roller mode offers greater rewards for players willing to take bigger risks. There’s also an in-game economy that allows you to trade and sell loot, and regular seasonal content brings in new gear, classes, and cosmetic unlocks.
Dark and Darker isn’t built for casual play. Death means losing your gear and progress, which can be punishing. However, for players who enjoy dungeon-crawler atmospheres, meaningful loot systems, and a strong sense of risk versus reward, this is one of the most unique and rewarding extraction shooters you can play.
3. Contractors Showdown: ExfilZone (VR only)
Developer: Caveman Studio | Platform: PC VR, Quest 2 & 3
ExfilZone is a new extraction mode within the VR title Contractors Showdown, and it might be one of the most ambitious virtual reality experiences in the genre. Building on the groundwork laid by Ghosts of Tabor, this mode brings a full Tarkov-style experience into VR with detailed survival mechanics, loot extraction, and high-risk gameplay.
What sets ExfilZone apart is its focus on physical realism. Players manually load magazines, apply healing items, and manage their character’s condition with precision. Each limb can be individually injured and must be treated accordingly. Whether you are bleeding, dehydrated, or suffering from a fracture, the game demands that you use the right item for the right problem. This level of detail can be overwhelming, but it also makes for one of the most immersive and stressful shooter experiences available.
Players can choose between two approaches: a full-gear Contractor run or a lower-stakes scav run. Losing a raid means losing your gear, so managing risk becomes a key part of the loop. Scav runs help players recover without putting their best items on the line. Between matches, players return to a safe house where they can stash loot, buy supplies, and prep for the next raid. The loop is familiar to anyone who has played hardcore extraction shooters on flat screens.
While ExfilZone is just a game mode and not a full standalone title, it delivers a surprisingly robust experience. The Metro map in particular feels purpose-built for extraction gameplay, with tight layouts and smart design. Other maps are borrowed from the game’s battle royale mode, which can be hit or miss. Performance is another concern, especially on lower-end VR systems. However, the depth of interactivity and the overall ambition of the mode offer something genuinely compelling.
For players with the hardware and the patience, ExfilZone is one of the most immersive extraction shooters available in 2025. It is punishing, detailed, and physically demanding. For the right audience, that’s exactly what makes it worthwhile.
4. ARC Raiders
Developer: Embark Studios | Platform: PC, PS5, Xbox Series X/S
ARC Raiders is a clear-cut example of what defines an extraction shooter in 2025. Built from familiar components of games like Escape from Tarkov, The Division, and Fortnite, it delivers an accessible experience that is instantly recognizable to anyone familiar with the genre. It doesn't push boundaries, but for players who enjoy PvPvE looter-shooters with survival mechanics, it's a dependable choice.
The gameplay loop is simple. Players enter the surface world, collect loot, and return underground with as much gear as possible. Along the way, two threats stand in the way: ARC robots and other players. ARC units, from spider-like scouts to massive combat drones, can be surprisingly dangerous and often show up in groups. Some encounters are deliberately set up to ambush players with layered enemy types, especially in enclosed or high-loot areas.
Human opponents are an even greater threat. Ambushing a distracted, well-equipped player near an extraction point is often more efficient than looting the environment. Playing in teams of three allows for better coordination. Teams can cover more ground, provide overwatch, and handle surprise encounters more effectively than lone players.
Combat is solid and responsive. SMGs feel fast but hard to control, assault rifles offer more balance, and sniper rifles deliver powerful hits. The weapon feedback feels reliable, and the game supports strategic movement and tactical play during engagements. Third-person controls are intuitive and on par with other modern shooters.
Environments are serviceable, consisting of abandoned buildings, overgrown fields, and industrial ruins. While the visuals aren't particularly memorable, they support the game's action-focused design. Loot includes crafting materials, gear, ammunition, and healing items. A special inventory pocket lets you retain key items even if you die, which helps ease the sting of early mistakes or bad luck.
Between matches, players return to an underground base where they can craft new equipment, sell loot, or upgrade their abilities through skill trees. The progression system is straightforward and allows you to specialize in combat, stealth, or mobility. Cosmetics are available through in-game purchases, but default character models are visually basic.
ARC Raiders doesn't try to redefine the genre. Instead, it assembles familiar parts into a functional, enjoyable shooter that gets the basics right. If you enjoy looting, surviving, and building your gear over time, this is an easy title to jump into.
Currently, the game is in invite-only testing. If you want to play on PC, visit the ARC Raiders Steam page and request access to the ongoing playtest.
5. Escape from Tarkov
Developer: Battlestate Games | Platform: PC
Escape from Tarkov is the blueprint for the modern extraction shooter. Often imitated but rarely matched, Tarkov established the genre's high-stakes loop: enter with gear, scavenge valuable loot, and extract without dying. If you do die, you lose everything you brought in, including your weapons, armor, and medical supplies.
Set in a fictional Russian city under lockdown, Tarkov is a hardcore, realism-driven PvPvE shooter. Bullet ballistics, armor penetration, ammunition types, and even dehydration or limb-specific damage are all part of the equation. Success depends on knowledge, awareness, and discipline. New players often struggle in their first hours, but those who persist will find a deep and rewarding sandbox.
Each raid is played on one of several sprawling maps, such as Customs, Interchange, and Lighthouse. Some are tight and urban, others open and rural. In every match, you'll face AI-controlled Scavs and potentially deadly player-controlled PMCs. You're free to explore, loot, or avoid combat, but extracting alive is the only way to bank your progress. The longer you stay, the more gear you might find, but the risk increases with every passing minute.
Tarkov’s inventory management is its own skill. Every item you find takes up physical space, and organizing your stash becomes a daily routine for dedicated players. Loadouts are fully customizable, down to scopes, suppressors, and ergonomics. The in-game economy is also player-driven, with a dynamic flea market and traders offering fluctuating stock based on availability and demand.
Progression involves leveling up your PMC, unlocking quests, building your hideout, and improving trade access. Over time, you’ll gain access to stronger gear and better options for survival. However, progression is not permanent. The game features periodic wipes that reset player inventories, hideouts, and quests. These wipes keep the game fresh and level the playing field but can be frustrating for players who prefer long-term accumulation.
Escape from Tarkov is not designed for casual play. It’s punishing, tactical, and opaque by design. Yet for many, that’s the draw. The intensity of each raid, the satisfaction of extracting with rare loot, and the thrill of outsmarting other players create a loop that is hard to replicate. If you're looking for the most complex and demanding extraction shooter on the market, this is it.
Final Thoughts
Extraction shooters continue to evolve in 2025, offering a diverse range of experiences for players who enjoy high-stakes looting, strategic combat, and the constant threat of loss. Whether you prefer historical horror in Hunt: Showdown, fantasy dungeon crawling in Dark and Darker, full-body immersion in VR with ExfilZone, or a more accessible sci-fi entry like ARC Raiders, the genre has something to offer nearly every type of competitive player. For those who want maximum realism and complexity, Escape from Tarkov still sets the bar.
One notable absence from this list is Marathon, Bungie’s (the legendary team behind the Halo series) upcoming extraction shooter. Once slated for a 2025 release, the game has hit significant setbacks. Following a series of controversies, including the lack of proximity chat and a confirmed case of art plagiarism, Bungie has reportedly canceled its main marketing push. Internal reports describe low morale, and while no official delay has been announced, it now seems unlikely that Marathon will launch on schedule.
Despite these challenges, the extraction shooter genre shows no signs of slowing down. As developers continue to experiment with structure, setting, and progression systems, 2025 may become a defining year. Whether you're a veteran scavenger or new to the format, there's never been a better time to jump in.
Recommended Products
Nitro V 15
Buy Now
Nitro V 16
Buy Now
-
Best Coworking Spaces that Have Worldwide Access
Coworking spaces are an alternative to traditional offices, allowing people to work within a shared environment. These spaces tend to provide communal facilities like printers, lounges, and a kitchen area. Coworking spaces offer workers, digital nomads, and company employees flexibility and a sense of community, which is important when working independently. Moreover, workers can gain networking opportunities with people from diverse backgrounds, which may not be possible in traditional office environments. Working from a coworking space is a cost-effective alternative, as users usually only pay for a seat at a desk or a small office cubicle.
Here are some of the best coworking spaces with worldwide access.
1. WeWork
With coworking spaces in 125 cities worldwide, including New York City, Tokyo, Lima, and London, WeWork is a popular digital nomad coworking space. WeWork offers flexible options like a pay-as-you-go or monthly global membership. There are even private office spaces with shared amenities for daily operational support. WeWork is used by well-known companies like Slack, Microsoft, and IBM, making it a great choice for individuals and companies alike. Costs vary by location and individual requirements, so be sure to check out the WeWork website for more details.
2. Regus (IWG)
Regus, owned by parent company IWG, offers a range of workspace options to fit various needs. From a customizable office rental by the hour or day, to a dedicated coworking desk, Regus has over 4000 offices worldwide. They also offer virtual offices, where companies can register a business address and obtain a telephone answering and receptionist service. Regus is trusted by large companies like Samsung, PayPal, and Spotify, offering monthly or daily packages at competitive rates. Depending on the contract, a US-based office space could cost between $15 USD and $1,015 USD monthly per person.
3. The Hive
The Hive is a popular coworking space within the Asia-Pacific region, operating in Hong Kong, Singapore, Thailand, Vietnam, Australia, and Taiwan. Depending on the specific area, these workspaces may provide private offices, hot desks, dedicated desks, meeting rooms, and even podcast and photo studios. Prices vary by location; for example, a hot desk in Singapore starts from $275 Singapore Dollars (approx. $213 USD). Check out The Hive website to find out more.
4. Mindspace
Mindspace offers virtual office memberships, dedicated desks, and team suites across multiple locations, from Amsterdam to Miami. They deliver a personalized service, including community engagement and events like tech talks and hackathons, creating a unique experience for members. Rooms include ultra-fast internet, 24/7 access, kitchens and lounges, and refreshments. Enquire online to arrange a tour or make a booking.
5. Croissant
A coworking space with multiple global locations, Croissant is on a mission to inspire the lives of remote workers. Croissant was founded in New York City by a group of friends who used to work together in coffee shops, buying croissants and coffee just to stay a bit longer. Now, Croissant is active across cities like Berlin, Chicago, and Barcelona, offering clear pricing ranges for a specific number of hours per month. Croissant also has an app that lets users search for and check in to open seats nearby. For pricing information, simply select your location on the Croissant website.
6. Impact Hub
Impact Hub connects entrepreneurs and innovators to organizations, partners, and investors. Alongside coworking spaces, they also offer community events to bring people together. Coworking spaces include private offices and dedicated desks, and membership benefits such as access to regular business clinics and workshops, modern workspaces, and free worldwide access for three days a year. Find more information, including locations and pricing, on the Impact Hub website.
7. Talent Garden
Providing a unique ecosystem of opportunities like meeting rooms, a relaxation area, and a cafe, Talent Garden is a coworking space that oozes community. Talent Garden has coworking spaces in countries like Italy, Spain, and Denmark, boasting a network of over 326,000 innovators, professionals, and tech enthusiasts. They offer fixed desks, hourly packages, or access to the digital community, and prices depend on the location.
8. Google Startup
Google for Startups Campuses provide physical locations for tech startups to enjoy training, mentoring, and access to a community of problem solvers. With various worldwide locations, such as Seoul, Madrid, Tel Aviv, and Warsaw, members benefit from mentoring and networking alongside comfy coworking spaces. Coworking spaces are reserved for Google for Startups participants. Find out more about these programs and locations on the Google for Startups website.
Is a coworking space right for me?
Coworking spaces are beneficial for digital nomads, company employees, or whole teams. They provide flexibility and unique networking opportunities due to the array of people using them. Whether you are looking for a space to work from during a short trip or a more long-term dedicated desk or small office, the coworking spaces in this article have something for everyone.
Recommended Products
Swift 14 AI
Buy Now
Swift X 16
Buy Now
0
0
