predator po3-640 why wont my ram run at 3200mhz

2»

Answers

  • This is weird. This xmp option should not be blocked.

    Oi! Eu não sou sou a cortana! Mas estou aqui para ajudar! Hi! I'm not the cortana! But I'm here to help!
    Se você gostou da minha resposta, marque como solução clicando em sim! If you liked my answer, mark it as a solution by clicking on yes!
    Aceite somente a resposta que ajudou a solucionar o seu problema! Please accept only the response that helped to solve your problem!
    Detection tool click here to find the serial number or partnumber of your model!                                                          
                                                      
                                                     egydiocoelho Trailblazer
     
    ProductKey clique aqui para descobrir o serial do windows! click here to discover the windows serial!
    Para usuários da comunidade inglesa, espanhola, francesa e alemã, usarei o google tradutor! :)
    For users of the English, Spanish, French and German community, I will be using google translator! :) 
  • NeoGeo
    NeoGeo Member Posts: 157 Skilled Fixer WiFi Icon

    XMP option is blocked on my PO7-640 with XMP ram modules, on the newest firmware. I think the motherboard can be temperamental with some ram types and the only solution would be if Acer devs look into it and provide an update, however there's no way to get through to them directly or even indirectly via the support channels.

  • ske007
    ske007 Member Posts: 13

    Tinkerer

    my thoughts exactly....so i guess there isnt much i can do :/

  • RMU8547
    RMU8547 Member Posts: 8

    Tinkerer

    Same issue here, P03-640 running R01-B0 BIOS and XMP is greyed out -- no ability to enable/disable, even after setting a supervisor password. RAM installed is XMP compatible etc. Baffling, and frustrating!

  • Parosred
    Parosred Member Posts: 5

    Tinkerer

    how can advanced settings be enabled, I have a P03-630 and it's limited to 2133mhz , hardly fair when I thought I was getting 3200mhz.

  • Parosred
    Parosred Member Posts: 5

    Tinkerer

    sent you a message on another thread, I am reading here about setting a supervisor password to enable xmp profile, is this correct?

  • Parosred
    Parosred Member Posts: 5

    Tinkerer

    I put 2x16 of Vengence and it shows 2133 speed, it's a P03-630, didn't try the Supervisor Password, need to know if it will work. And do I need to but 2 more sticks of 2x16 to fill remaining slots as I understand from Billsey that's if I understand this correctly.

  • chugzilla
    chugzilla Member Posts: 727 Seasoned Specialist WiFi Icon

    well, i have 4x16 crucial and its xmp 3.0 and mine wont work either, so they musta blocked it with one of the last bios updates, but i am getting 4000 mhz with 4 sticks of ddr5, the only option we have is to replace the MB and thats about it.

  • Parosred
    Parosred Member Posts: 5

    Tinkerer

    can't find anyone at Acer to explain.

  • Quick420
    Quick420 Member Posts: 40 Devotee WiFi Icon

    I had a similar issue,my xmp is not greyed out but when I enabled it my system would not boot correctly.I would get the single beep then lose hdmi signal causing a useless pc.I set it back to xmp off and it boots correctly.This is with XMP 3200 1.35volt ddr4.I had to buy some crappy kingston KVR jedec3200 1.2volt with cl22 to get 3200mhz to even work.I wish acer would fix whatever issues these bios's have with xmp memory,just give us an option to tune our ***** memory manually already you cheapskates….

  • chugzilla
    chugzilla Member Posts: 727 Seasoned Specialist WiFi Icon

    well, i was just speaking to a level 2 tech and he said its an intel problem with the chipsets they chose for our pcs, but upon researching my chipset is does not say that, i think they locked the bios so nobody can fry-wreck their pcs and he told me they are fine tuned and dont need to be overclocked and for the most part he is right mine smokes on games and to me thats the best test even over benchmarks but since i maxed out my ram and added that thermalright cpu plate my pc runs even better and faster with both benchmarks and my games so im happy lol even if i am stuck at 4000 mhz its all good i love the pc. this is something i found about mine.

    Thank you for choosing the H67H6-AM motherboard. This motherboard is a high performance, enhanced
    function motherboard designed to support the LGA1700 socket for Intel® ADL-S Processor for high-end business or personal desktop markets. This motherboard is based on Intel® H670 Chipset for best desktop platform solution. This motherboard supports up to 64 GB of system memory with dual channel DDR5 4400MHz DIMM.

  • billsey
    billsey ACE Posts: 34,138 Trailblazer

    The PO3-630 doesn't support XMP overclocking. The base speed of the memory you got is 2133, so everything will run at 2133 until you replace that with actual 3200 memory.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • thecj
    thecj Member Posts: 9

    Tinkerer

    the ram in pc is kingston beast furry 2666 mhz 288pin dimm 2*8gb have the same pc if you are in canada you can get same ram from canadacomputers.com

  • Goremez
    Goremez Member Posts: 1 New User

    So. Not sure if you ever figured it out but I just installed 32GB of Corsair Vengeance LPX DDR4 3200, went into the BIOS and was able to enable XMP. RAM is running at 3209MT/s. Before, XMP was greyed out. I have the PO3-640 with the 12700F and it wasn't an option before. Now it is.

  • billsey
    billsey ACE Posts: 34,138 Trailblazer

    Yeah, they did a BIOS update on the PO3-640 that allowed XMP, but all memory on the system needs to be XMP and all needs to support the same profile.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.