AspirePEW72-Windows won't start saying"Windows Error Recovery. Windows failed to start. Loading file

Harper776
Harper776 Member Posts: 1 Newbie
edited November 15 in Aspire Laptops

My nightmare began when I went to switch on the laptop as usual. Instead, up came the black screen with white writing on it. The white writing said "Windows Error Recovery. Windows failed to start. A recent hardware or software change might be the cause. If Windows files have been damaged or configured incorrectly, Startup Repair can help diagnose and fix the problem. If power was interrupted during startup, choose Start Windows Normally". As Startup Repair was automatically selected and on that 30 second countdown thing, I let it continue. A white bar went along the bottom of the black screen and with a message saying, "loading files".

What came up next wasn't the blue screen of death. Instead, there was this thing that looked like a screensaver. It had blue sky with vapor trials and a dove with a green leaf in its mouth. It was like this for over an hour and then I went to switching it off and on again - at the wall. Up came the black screen with white writing again and this time I selected Start Windows Normally. It flicked to the usual login page briefly before flicking back to the black screen. It kept doing this so tried the default option again and again the sky screensaver was on for ages. Tried switching the off on switch but nothing happened and so switched it off at wall and elected to get help.

I've looked at the forums and about holding the on-off button down for 5 seconds and pressing things like F2 and F10 - but I think this is a bit different.

It's an Acer Aspire from April 2011, model PEW 72.

Many thanks in advance!

[Edited the thread to add model name and issue detail to the title]

Answers

  • Joe_Kingsley
    Joe_Kingsley Ally Posts: 130
    edited November 15

    Hi @Harper776

    Since the computer is stuck on the "Windows Error Recovery" screen, please try these steps to fix it:

    Run Startup Repair
    Restart your computer, select Troubleshoot, then Advanced Options, and then Startup Repair. Follow the prompts and choose an account.
    Remove or replace hardware
    If a piece of hardware is malfunctioning, you can try removing or replacing it.
    Use System Restore
    You can try restoring your system.
    Use System Image Recovery
    You can try recovering your system image.
    Uninstall updates
    You can try uninstalling any recent updates.
    Use Command Prompt
    You can try using Command Prompt.
    Boot in Safe Mode
    You can try booting your computer in Safe Mode.

    You can also try disabling the Windows Error Recovery screen by following these steps:

    1. Boot your computer.
    2. Click Start and type CMD.
    3. Right click on CMD and click Run as Administrator.
    4. Type bcdedit /set bootstatuspolicy ignoreallfailures. 

Categories