ED320QR, I plugged it in, I pushed the power button, and the blue power light came on,but no image

Alexxe
Alexxe Member Posts: 2 New User
edited November 1 in Monitors

I finally removed my ED320QR from its box; it's been there a while. I plugged it in, following the instructions. I pushed the power button, and the blue power light came on, but there was no image on the monitor. What's going on?

[Edited the thread to add model name to the title]
[Edited the thread to add issue detail]

Answers

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    You should get the splash screen for a bit, then it should start hunting for a signal.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • Alexxe
    Alexxe Member Posts: 2 New User

    Nothing at all. Tried the digital and the hdmi and no screen activity.

  • billsey
    billsey ACE Posts: 34,601 Trailblazer

    If the splash screen doesn't show at all it's likely a hardware issue with the monitor. If it's been a short enough time, swap it out with your vendor, if too long for that contact Acer for warranty repair.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Categories