Triton 500 not booting up.

TheGinJiCode
TheGinJiCode Member Posts: 1 New User
Hi, I have a predator Triton 500 laptop.
Please help. I have a problem with my laptop. Below are the behaviors of my laptop:

After pressing the power button.
1. No Keyboard or Logo lights.
2. There are 2 blue color indicator on the right side for both the battery and the power.
3. Black screen

I properly shut it down prior to this.

I have tried hard reset and clicking the battery reset on the back of the laptop for 4 sec. Still the same.

I really appreciate a help. Thanks in advance


Answers

  • Easwar
    Easwar Member Posts: 6,727 Guru
    Hi TheGinJiCode,

    # Try to get the BIOS page.
    1. Turn OFF the unit.
    ​2. Press and hold the F2 key and turn on the unit. 
    3. You will be in setup utility page. 
    4. Once you got the screen release the F2 key.
    5. Tap on F9 key and hit enter key without changing the option.
    6. Tap on F10 key and hit enter key without changing the option.
    7. Your unit will restart by itself. 

    Check this T/S and post the result. ​
  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    edited June 2021
    TheGinJiCode

    Try to use the computer without the charger and check it.      Try to use the charger on a different outlet in a different room,  try to bypass the surge protector and connect it directly to power outlet and check it. 

    Most of the issues are getting fixed by doing a power drain and bios defaults.   Kindly follow the steps given below..


    Turn off the laptop. Disconnect or unplug  the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and - sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.


    If you dont find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug  the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed,  flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 

    While turning on the computer, tap f2. It  will go to bios. Press f9  once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.


    Hit 'Like' if you find the answer helpful! 
    Click on 'Yes' if the comment answers your question!

     

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • matibru
    matibru Member Posts: 13

    Tinkerer

    Did you find a solution? I'm having the same problem.
  • William_mk2
    William_mk2 ACE Posts: 4,198 Pathfinder
    @matibru

    I am really sorry for the inconvenience..   Let us do the basic steps first..

    Doing the power drain and bios defaults will really help.  Kindly follow the steps given below:

    Turn off the laptop. Disconnect or unplug the charger cable, devices or any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, you can find a  pin hole. It is a tiny hole. You can a find a battery symbol indicator next to the hole. It is like a + and – sign symbol as though somebody is trying to shift the battery out. Insert the pin on to the hole for 30 seconds. Remove the pin. Flip the laptop. Connect the charger cable, turn on the computer.  Only on laptops where the battery is inbuilt you can find the battery reset hole on the back of laptop.

    If you don’t find a pin hole on the back of laptop then you might be using removable battery. There is no need to unscrew anything to remove the battery.  Turn off the laptop. Disconnect or unplug the charger cable, devices and any other cables connected to your laptop. Close your laptop. Turn it upside down.  On the bottom of the laptop, please look at the top or bottom depending on the way you look at it. You can find a long door. It is a battery removable door.  Just below that you can find a latch.  If you move the latch you can remove the battery door. Once the battery is removed, flip the laptop. Open the top cover, press and hold the power button for 1 minute. Connect the battery back on the back of computer. Connect the charger cable back and then turn on the computer. 
     
    If you don’t see a reset pin hole on the back of laptop or if you are not able to remove the battery (if it is inbuilt) then please unplug all the cables and devices out of laptop.   Hold the power button for 1 minute.  After releasing the button you should wait a while before plugging in power. Just because the button has been pressed doesn’t bleed off all the residual electricity on the motherboard. Wait 15-30 minutes before plugging in power. Then once power is connected wait for a full battery indication before turning the system on. That allows the battery to fully reset it’s internal statistics.

    Connect all the cables back and restart the computer.  


    While turning on the computer, tap f2. It will go to bios. Press f9 once. It will show load bios defaults with a yes or no popup. Press enter. Popup screen will disappear.  Press f10 once. It will show save changes popup with yes or no. Press enter. Computer will restart and it will load into windows.   
     
    It might also be the issue with battery, charger or power outlet.   Try to use the charger in a different room on a different power outlet.  Try to bypass the surge protector and connect it directly to power outlet.    Try to use an alternative charger if possible.    Try to turn on the computer without the charger and check it  ( as long as the battery is not drained out )  

    Try windows x 
    go to device manager 
    expand Battery
    right click on all the items below battery – uninstall 
    Restart the computer 
     
    It should work fine.. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • Scivi
    Scivi Member Posts: 6

    Tinkerer

    Have you found a solution yet? I am having the same problem

  • AcePred
    AcePred Member Posts: 6 New User

    I had a similar issue with the pc not booting up because it would just shut off when trying to start the fans up, which I considered that it had a short curcuit so I opened it up and cleaned thorougly with isopropyl alcohol and a soft toothbrush all over the motherboard, under tape, under the heatsink and every place that might develop corrosion and it worked for me, the pc no longer has boot issues as the short curcuit was fixed. I especially noticed that there was a small area of corrosion that seemed to be connecting two of the battery connector pins. (Can be nice to have a headflashlight when looking for corrosion)


    might work in this case too but if not, at least you can rule that out