Nitro 5 AN515-45 black screen after directly closing lid at low charge

Rambo68
Rambo68 Member Posts: 6 New User

Hey , my Nitro 5 laptop is showing black screen after I closed lid of laptop. While doing so , at first I put my laptop in sleep mode and was about to close lid , at 30 degree the screen unlocked..still I closed the lid [I was at low charge 20-25 %]

No Acer logo , keyboard lit, caps and other key works, I can login to windows 11 blindly (welcome sound comes)

Few months ago, I had black screen while is using laptop, at that time force restart fixed

But now , tried many things . Holding power button and restarting, ctrl+win+shift+b several times etc...I am out of warranty..

Answers

  • sri369
    sri369 ACE Posts: 2,814 Pathfinder

    Does the screen turn on when you start laptop to show the acer logo? If nothing works, try getting into BIOS screen by repeatedly pressing F2 when starting laptop.

    -----
    Karma...
    LIKE - if helpful
    ACCEPT - if helped resolve
  • Rambo68
    Rambo68 Member Posts: 6 New User

    No, no Acer logo

  • Rambo68
    Rambo68 Member Posts: 6 New User

    No , I can't see Acer logo

  • Puraw
    Puraw ACE, Member Posts: 14,043 Trailblazer

    Have you tried pressing the F7 button either with or without the Fn key?
    You should leave the power adapter plugged in 24/7 to avoid situations like this, and Sleep mode was replaced by Modern Standby in Windows10 22H2 and W11. If your battery does not support Connected Standby, you may have power problems. What are the LEDs indicating when the adapter is not plugged in (power LED slow amber flashing?) and what do you see when you plug in the adapter (amber battery LED?)

    Try connecting an external monitor or TV to the HDMI port and see if you get a display, if no display even after pressing the F7 key you may have to bring the laptop to Acer Services to reset the system to factory default, no longer under warranty after 3 years but the service fee will be small (if no hardware needs to be replaced).

  • Rambo68
    Rambo68 Member Posts: 6 New User

    I have tried fn+ different functions key ,no change , ofcourse the RGB can be controlled using fn+f6 something, ......Yes the battery and power indicator are normal, like when charging it is Amber,and it flashes when low , blue when full.I will be able to check through external monitor within 1-2 days as I don't have access to it for now.... Can you estimate the cost for service fee to reset system to factory default without hardware changes??I am in India

  • Puraw
    Puraw ACE, Member Posts: 14,043 Trailblazer

    Hi, in the Philippines Acer Services charged $25 3 years ago that may be $30 now.

  • Rambo68
    Rambo68 Member Posts: 6 New User

    Ok thanks for guidance, I will try to drain battery then remove it for sometime and clean and reinsert the RAM again ,

  • Rambo68
    Rambo68 Member Posts: 6 New User

    Update: Hi, I cleaned RAM and removed battery for a min and thankfully, it worked for me