Acer nitro 5 AN515-58 sound problem My external speaker make a pop noise

Rembou
Rembou Member Posts: 9

Tinkerer

edited October 2023 in Nitro Gaming

Hello all. I bought a new Acer nitro 5 AN515-58 with core i5 12500h, rtx 4060 8gbvram. My external speaker make a popp noise before start any sound and when I stop after 2-3 sec again every time. I try to change to 16 bit I turned off hardware acceleration reinstalled realtek software, updated wn11 nothing helped

[Edited the thread to add issue detail]

Answers

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,456 Pathfinder

    @Rembou

    Does this happen with the charger unplugged?

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • @Rembou

    I understand you say "My external speaker make a popp noise before start any sound and when I stop after 2-3 sec again every time""

    How is your internal speaker working. I am suspecting issue with external speaker. Please try a different external speaker and check.

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • Rembou
    Rembou Member Posts: 9

    Tinkerer

    After windows install the internal speaker did the same thing but with all driver installation and windows update it disappeared.

    I'm using with plugged in.

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,456 Pathfinder

    @Rembou

    With the charger unplugged, does the speaker still produce the pop sound?

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • @Rembou

    I understand your internal speaker is working fine now

    You are still facing the issue with external speaker

    Try a different external speaker and check.

    If it is still not working then we have to do a refresh and reset

    click on start - settings - update and security - recovery - reset this pc - get started 

    or 

    on start - type here to search - type reset this pc - click on reset this pc on the top  - click on get started 

    or

    Try windows + r using keyboard
    on run window - type systemreset

    It will show you keep my files and remove everything
    chose keep my files 
    chose the account - type the password - click on local reinstall - click on reset 
    It will be in progress.. 
    login to computer and start using the computer. 
    If it is still not working 

    click on start - settings - update and security - recovery - reset this pc - get started 
    chose remove everything 
    click on local reinstall - just remove my files - click on reset
    It will be in progress

    Note:

    If you do refresh ( keep my files ) -  all your personal files like pictures, music , documents , videos  will still be intact.   Only the applications will be lost

    If you do reset  ( remove everything )  - you are doing a factory default.   It will become like a day one computer.    It will wipe out everything and take your computer to day one like a new computer. 

    You can also do the recovery in an alternative way..

    There are two alt keys on the keyboard.  If you look at the bottom row of keyboard you can see the one on the left side of space bar and the other on the right side of space bar.  The alt key on the right side will be looking like alt, alt gr or alt car.  Turn off the computer.  Hold the alt key on the left and tap f10 continuously.   It will go to repair mode. It will show you chose an option, continue, troubleshoot.   If it is not going to repair mode, turn off the computer.  Turn on the computer.  Hold the right alt key ( alt gr or alt car or alt )  and then tap f10 continuously.  It will go to chose an option continue and troubleshoot..

    It will show you chose an option, continue, troubleshoot
    Go to troubleshoot  -  click on reset this pc
    click on keep my files  ( only applications will be lost )   chose your account and type your password   - click on local reinstall  - click on reset
    It will be in progress 

    If the keep my files option is not working 

    Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – just remove my files – click on reset 
    It will reinstall windows. 

    If the just remove my files is not working..

    Go to troubleshoot  -  click on reset this pc – click on remove everything – click on local reinstall – Fully clean the drive – click on reset 
    It will reinstall windows. 

    Note: You can also go to chose an option , continue , troubleshoot by holding the alt key + tapping f10  or alt gr + tapping f10 on the keyboard while turning on the computer.    Once you see the troubleshoot option, you can stop tapping the f10 and stop holding the alt key.    Then you can try the keep my files and remove everything ( just remove by files and fully clean the drive ) by following the steps which was mentioned above. 

    Click on "Like" if you find my answer useful 

    Click on "Yes" if it answers your question.


    Please click YES if I answered your question

    I am not an ACER employee
    B  Thank you and have a BLESSED AND HAPPY DAY  B


                                         ★★ WILLIAM - MRK ★★

  • Rembou
    Rembou Member Posts: 9

    Tinkerer

    edited October 2023

    Yes the problem still there withother peaker and unplugged

    So it's a hardware problem?

  • AnhEZ28
    AnhEZ28 ACE, Member Posts: 4,456 Pathfinder
    edited October 2023

    @Rembou

    Try to do a Windows reset with the keeping files option. This will eliminate the issue related to software.

    Please remember to include @AnhEZ28 when you want to reply back to my comment so that I can check your response.
    Thank you and have a nice day!
  • Rembou
    Rembou Member Posts: 9

    Tinkerer

    It seems I solve the problem but I need more time to test. What I do: I installed the previous realtec software the latest one.