I want to upgrade my Acer Predator PO5-600S

XenonAlfie
XenonAlfie Member Posts: 7

Tinkerer

Would these parts be compatable with my pc…

Samsung 980 PRO M.2 NVMe SSD 2 TB

Corsair Vengeance LPX 64 GB (4 x 16 GB) DDR4 2666 MHz

Corsair white iCUE AF120 RGB ELITE 120mm PWM x6

Also an external power button (keyboard switch).

Best Answer

  • billsey
    billsey ACE Posts: 34,584 Trailblazer
    Answer ✓

    The M.2 slot is PCIe x4 gen 3 and also supports x2 and SATA. So I wouldn't pay extra to get the 980 Pro since it will run at the gen 3 speeds, not gen 4. The memory looks correct, 2666 and 16GB per stick. Most people changing the cooling are going with the Noctua NH-D9L setup, it fits the case size for the PO3 models. I'm not sure you have enough room for six fans in your case… The power button is just a momentary contact switch connected to the motherboard front panel connector, so could be most anything.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.

Answers

  • billsey
    billsey ACE Posts: 34,584 Trailblazer
    Answer ✓

    The M.2 slot is PCIe x4 gen 3 and also supports x2 and SATA. So I wouldn't pay extra to get the 980 Pro since it will run at the gen 3 speeds, not gen 4. The memory looks correct, 2666 and 16GB per stick. Most people changing the cooling are going with the Noctua NH-D9L setup, it fits the case size for the PO3 models. I'm not sure you have enough room for six fans in your case… The power button is just a momentary contact switch connected to the motherboard front panel connector, so could be most anything.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • XenonAlfie
    XenonAlfie Member Posts: 7

    Tinkerer

    Would the Samsung 970 EVO Plus be a good m.2 than?

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    Yup, that's a well respected brand and should work great.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.
  • mseefofi
    mseefofi Member Posts: 2 New User

    Hi

    can the case for this PO5-600s take a standard size ATX motherboard for an upgrade?

    thanks

  • billsey
    billsey ACE Posts: 34,584 Trailblazer

    The PO5-600s uses a micro-ATX form factor board. A full sized ATX will likely not fit.

    Click on "Like" if you find my answer useful or click on "Yes" if it answers your question.